Overclock.net banner
1 - 3 of 3 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
Ok, I'm trying to oc my i7, problem is whenever I up it from 20x 133 to anything else it beeps at startup and won't load. But I can OC if I change all my memory setting to "auto", instead of using 1600 2:12, 8,8,8,24 and 1t and 1.65 DIMM volts.

It's either one or the other, I can't do both together. Do I need to up my system volts to oc? It's on auto right now.

Does anyone have any ideas?
 

·
Banned
Joined
·
8,570 Posts
Couple things you will want to do overclocking an i7 920 with the evga x58 and corsair ram.

1. Don't use the 20x multi as it's a unstable multi. Use 19 or 21 if possible
2. you will want to put your ram on the 2:8 divider
3. you could need anything between +200mv to 350mv on CPU PLL VTT

That should enable you to hit 200 bclk with the i7 920.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top