[what?]

So i can do either one these stable with my comp

205fsb with timings at 2.5-3-3-7 (2.5 vdimm)
or
200fsb with timings 2-3-3-11 (2.7 vdimm) ( read in the general overclock guide that nf2 boards like the last # to be 11? )

any suggestions as to which would be better?

 

[YiffyGriffy]

Why not just up the vdimm at 205 and keep the same timings?

 

[what?]

I tried that already, the only stable settings with my cas lat at 2 is 200fsb. Even at 2.7vdimm.

edit: i think i lied about the 205 at 2.5vdimm. Im pretty sure i have to turn it up to 2.6/7

 

[YiffyGriffy]

That's really strange...
Well, run benchmarks (3DMark01SE) at both settings and see which is better.

 

[what?]

good idea

 

[xms]

I did some benches a while back on my system of FSB vs Timings:

http://www.overclock.net/showpost.ph...75&postcount=8

 

[YiffyGriffy]

That's on an Intel though, he's running an XP and they're pretty sensetive to memory timings.