Overclock.net banner

1 - 3 of 3 Posts

·
Registered
Joined
·
77 Posts
Discussion Starter #1
4days ago i bought a used GA-EP45T-UD3P rev 1.0 board from ebay for $160and it is on it`s way to me. I have a Q9650 cpu with a 1.2250 vid which i am going to use with it.

What are my chances to reach 4ghz and beyond overclocks?

As for the memory i have a pair of 2gb corsair xms3 dhx ddr3 1600 9-9-9-24 1.8v stock timings

Until my board arrives can some give me some good bios setting to reach 4ghz on this board?
 

·
Premium Member
Joined
·
4,635 Posts
Quote:
Originally Posted by Q9650;13087238
4days ago i bought a used GA-EP45T-UD3P rev 1.0 board from ebay for $160and it is on it`s way to me. I have a Q9650 cpu with a 1.2250 vid which i am going to use with it.

What are my chances to reach 4ghz and beyond overclocks?

As for the memory i have a pair of 2gb corsair xms3 dhx ddr3 1600 9-9-9-24 1.8v stock timings

Until my board arrives can some give me some good bios setting to reach 4ghz on this board?
Check THIS THREAD as it's identical motherboard but DDR2..

Post your request tere and I'm sure that someone there will help you..

CHEERS..
 

·
Registered
Joined
·
77 Posts
Discussion Starter #3
Here is my stable 4GHZ 34% Overclock! Passes IBT Stress Level Maximum 10Passes ! ! !

CPU = Q9650 VID: 1.2250v
Motherboard = Gigabyte GA-EP45T-UD3P
BIOS Version = F7
Ram = 2x2GB Corsair XMS3 DHX DDR3 1600mhz

MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster...................: Auto
CPU Clock Ratio.............................: 9x
Fine CPU Clock Ratio.......................: +0.0
CPU Frequency..............................:4.00Ghz (445x9)

Clock Chip Control
Standard Clock Control
CPU Host Clock Control..................: Enabled
CPU Host Frequency (Mhz).............: 445
PCI Express Frequency (Mhz)..........: Auto
C.I.A.2....................................: Disabled

DRAM Performance Control
Performance Enhance...................: Turbo
(G)MCH Frequency Latch...............: Auto
System Memory Multiplier ..............: 4.00D
Memory Frequency (Mhz) ..............: 1780mhz
DRAM Timing Selectable ................: Manual

Standard Timing Control
CAS Latency Time.............................: 7
tRCD............................................: 7
tRP..............................................: 7
tRAS............................................: 20

Advanced Timing Control
tRRD...........................................: 4
tWTR..........................................: 4
tWR............................................: 8
tRFC...........................................: 60
tRTP...........................................: 4
Command Rate (CMD) ....................: 2T

Channel A
Static tRead Value.........................: 7
Channel B
Static tRead Value.........................: 7

Motherboard Voltage Control
CPU
Load-Line Calibration....: Disabled
CPU Vcore.................1.22500V*..........: 1.32500v
CPU Termination..........1.200V*..............: 1.200v
CPU PLL....................1.500V*..............: 1.500v
CPU Reference............0.760V*..............: Auto

MCH/ICH
MCH Core...................1.100V*...........: 1.100v
MCH Reference............0.760V*............: Auto
MCH/DRAM Reference....0.750V*......... ..: Auto
ICH I/O.....................1.500V*............: Auto
ICH Core...................1.100V*............: 1.100v

DRAM
DRAM Voltage.............1.500V*............: 2.000v
DRAM Termination.........0.750V*............: Auto
Channel A Reference......0.750V*............: Auto
Channel B Reference......0.750V*............: Auto
 
1 - 3 of 3 Posts
Top