[mef]

Nowhere can I find information gainwards volt mod for the 9600 GT PCB red: (
whether someone helped to raise the voltage to the gpu, overclock my card is not high, only 700 mhz on gpu, I have a 500 watt power supply

 

[Liighthead]

1. pictures of the card?
2. how are temps?

also this could kill your card. just so you know

and welcome to OCN enjoy your stay

 

[mef]

I know this may damage the card
interesting possibility is that this card with the change in volt ?
temperature is 52 degrees, while playing
http://img190.imageshack.us/i/p5160752es7.jpg/

 

[PizzaMan]

Got a pic of the back as well?

 

[mef]

http://img809.imageshack.us/i/96gt.jpg/
This resolution pictures can be?

 

[StuffStuff1]

Pencil mod it. Volt modding it will require lots of work and will probably kill you card in 6 months.

 

[mef]

there is no easy way? and as for that you need? a lot of electronic stuff?
maybe if set to 1.25 volts? card is not burnt out quickly?

 

[StuffStuff1]

Just pencil mod it. all you have to do is go to the local art shop. Buy a thick pencil and draw a line from a lower resistance resistors to your GPU.

It works because grafit is conductive. So it moves the electricity with out a wire or soldering ETC ETC

 

[mef]

at which point I paint ?, maybe some example

 

[PizzaMan]

Mef, what are the numbers on the ICs I've labeled?

 

[CL3P20]

..should be an APW7088.. just different design PCB from their other version. Double check the IC as Pizza mentioned though.

**could be RT8802A i suppose as well..though unlikely with only 2x power phases I think..

..nope.. its a APW7088..almost 100%

 

[mef]

Those photos downloaded from the internet, I'm sorry but these are not pictures of my card, i thought it's the same card gainwarda.9600gt red PCB. Tomorrow I'll do a new photo camera, my card

 

[mef]

I wrote down the numbers, it may be useful
Front card:
U2:
5383
G5EN0

on the back of the card are only two
SU2:
RT9259A
PSAG00M

SU5:
74HCT08D
L8C2W308
UNG0823E

 

[CL3P20]

Well the RT9 is for vmem commonly..
View attachment 205824

View attachment 205825

the controller on the front is the one we need for GPUv though..I dont seem to have any datasheets for it. Can look into this weekend though if someone doesnt come up with it before then.

 

[mef]

picture my card

 

[CL3P20]

and which IC from your list matches this pic? -is it the U2: 5383 G5EN0 ?

This is the one for GPUv..

 

[mef]

yes. U2: 5383 G5EN0
So where pencil paint or will have something more to raise the voltage? and anyway thanks for your help

 

[PizzaMan]

Got some more work to do before we know where to mod.

I don't have any datasheets with 5383. Looks like an ISL, but I'm not sure...

 

[mef]

On the Internet, there is nothing about the volt mod for the Gainward 9600 GT red pcb
Nobody did Gainward volt mod: (
really thanks for the reply