Overclock.net banner

1 - 2 of 2 Posts

·
Registered
Joined
·
32 Posts
Discussion Starter #1
hello all kind of new to this oc thing. so here we go i have set my memory from 333mhz to 400mhz i have it set to 1t and the ht freq at 1x if i oc even the slightest bit it reboots.but at 333mhz i can oc like mad i have yet to mess with the ram timing my question is what mhz should my memory be set at. please help!
thanks in advance the Dogg
 

·
Registered
Joined
·
3 Posts
If you set your memory down to DDR333 and then proceed to bump up the HTT (FSB), you aren't necessarily overclocking your ram. suppose your HTT is 220 x 10, with your divider at 333 (that's 5/6), your actual ram speed is 183.33. That would mean that it's still underclocked.

Give it 2.7 or 2.8 volts if you intend to overclock at all with DDR400. I have run this ram stable at HTT 235 (x10) with DDR400 (that's a 235 FSB on value ram). I didn't expect that kind of performance out of it, but it is capable of that. Good luck.
 
1 - 2 of 2 Posts
Top