Perc 6i?
Generic Low-Profile Heatsink Stock
Does anyone know where I can get some cheap generic low-profile heatsinks? I want some so that I can cut to shape if needed. I've looked around eBay's Industial parts but all of those are too big.
They must be less than .4" or 10mm to fit in a single slot. I am looking for something like 3x3" or bigger.
Here's an example of something I did with a random heatsink:
![]()
They must be less than .4" or 10mm to fit in a single slot. I am looking for something like 3x3" or bigger.
Here's an example of something I did with a random heatsink:
1 - 19 of 19 Posts
Quote:
You should know.
![]()
Quote:
Not what I'm looking for at all....
I want generic heatsinks so I can mod in case I need a custom heatsink for... TV tuners, video cards, RAID cards, ect.
Originally Posted by borito4  Perc 6i? |
Quote:
Originally Posted by xlent00 You could always try some chipset heatsinks http://www.newegg.com/Store/SubCateg...hipset-Cooling |
I want generic heatsinks so I can mod in case I need a custom heatsink for... TV tuners, video cards, RAID cards, ect.
3
Quote:
Direct sources generally require bulk orders.
![]()
I have a bunch of these already ( I believe they are Aavid heatsinks):
http://cgi.ebay.com/ws/eBayISAPI.dll...Category=66946
http://cgi.ebay.com/Heatsinks-Ball-G...3A1%7C294%3A50
They're cheap and nice to have. I stick them around on random components (i.e. 680i, TV tuner, GDDR, ICH9R, ect)
Originally Posted by gonX Might something like THIS work, or are they also too tall? |
I have a bunch of these already ( I believe they are Aavid heatsinks):
http://cgi.ebay.com/ws/eBayISAPI.dll...Category=66946
http://cgi.ebay.com/Heatsinks-Ball-G...3A1%7C294%3A50
They're cheap and nice to have. I stick them around on random components (i.e. 680i, TV tuner, GDDR, ICH9R, ect)
2
Quote:
Well you said you needed a lot so I don't see why not
![]()
Originally Posted by DuckieHo Direct sources generally require bulk orders.
I have a bunch of these already ( I believe they are Aavid heatsinks): http://cgi.ebay.com/ws/eBayISAPI.dll...Category=66946 http://cgi.ebay.com/Heatsinks-Ball-G...3A1%7C294%3A50 They're cheap and nice to have. I stick them around on random components (i.e. 680i, TV tuner, GDDR, ICH9R, ect) |
3
Quote:
I also bought 3 packs of the little ramsinks and they work well on the ram chips on graphics cards.
Here are some other ones to look at.
http://www.dealextreme.com/details.dx/sku.13988
http://www.dealextreme.com/details.dx/sku.15346
Originally Posted by Adrienspawn These are too small to mod but they're cheap and come in handy. I've bought a few packs and use them everywhere. These are really thin. Haven't tried them though. |
Here are some other ones to look at.
http://www.dealextreme.com/details.dx/sku.13988
http://www.dealextreme.com/details.dx/sku.15346
Quote:
They've been Out of Stock for years.
![]()
Originally Posted by whe3ls i how about this http://www.petrastechshop.com/pedila.html |
2
Quote:
maybe iandh could make you a few?
I dont know alot that have been linked here seem to be ok
Originally Posted by DuckieHo They've been Out of Stock for years.
|
I dont know alot that have been linked here seem to be ok
2
Quote:
Not to put down iandh, he does great work, but as custom work it's kind of the opposite of generic and inexpensive
![]()
Originally Posted by BLKKROW maybe iandh could make you a few? I dont know alot that have been linked here seem to be ok |
2
Ducky
I have some old HS that vary @ about 1 3/4"x1 3/4" to 2"x2" with a ranging in thickness of (2) 1/4' (1) 3/8" (4) 3/8" but have a lip on two opposing sides on the contact surface, (2) 5/8" thick
They typically had 40mm fans on them.
Sorry, nothing as large in square inch as in your OP pic though
![]()
I have some old HS that vary @ about 1 3/4"x1 3/4" to 2"x2" with a ranging in thickness of (2) 1/4' (1) 3/8" (4) 3/8" but have a lip on two opposing sides on the contact surface, (2) 5/8" thick
They typically had 40mm fans on them.
Sorry, nothing as large in square inch as in your OP pic though
Quote:
Those heatsinks are generally small and you can buy them at Chinese outsource sites.
Besides, I don't want to pay $10-15 per shipped.
Originally Posted by yutzybrian buy some old passive cooled graphic cards. the heatsinks on them might work |
Besides, I don't want to pay $10-15 per shipped.
1 - 19 of 19 Posts
