[Jeff Drumheller]

I hear y'all, I will work on it.

Great to hear. I have an Arous Master X570, and was considering returning it due to the fan. It really needs to be in SmartFan..

Can you tell me what Bios are the newest? I have F5e but cannot boot with G.Skill 3600 2x8gb in XMP profile, it defaults down to 2133.

 

[Jeff Drumheller]

Really? Newest if F5E.

Can you try F5C - http://download.gigabyte.us/FileList/BIOS/mb_bios_x570-aorus-master_f5c.zip

I have 4x8GB @ 4000 XMP no problem. Worked on all the F5x BIOS I have tried.

Thanks for the reply! Huge help having an actual employee respond. My board shipped with F3 Bios, I tried to post XMP profile but it did not post. I updated to F5e last night and got the same exact result, reverts to 2133. I plan to try manual settings after work today, maybe just try to post @ 3000 speed...

Here is the exact G.Skill 3600 Kit I am using:
F4-3600C17D-16GTZR
https://www.newegg.com/g-skill-16gb-288-pin-ddr4-sdram/p/N82E16820232483

FWIW I do not see this kit model # on the supported list: http://download.gigabyte.us/FileList/Memory/mb_memory_x570-aorus-master_matisse.pdf
I do see some type of AMD Specific memory kit G.Skill 3600: F4-3600C16D-16GVK'

I also installed the latest chipset driver from AMD on the Gigabyte x570 Master page.

Is F5c supported? I do not see it anywhere on the Gigabyte site.. Do you have a kit part # for 3600 speed you recommend?

 

[Jeff Drumheller]

What memory are you using and which model x570?

Mine will sometimes hang at the boot or reboot a few times, but this is mostly me trying to set my XMP profile. It was worse on F3, i'm on F5e now which is slightly better, but still wont post with my GSkill Tridentz 3600 as noted a few posts up. My bios reacts just fine, no delay.

 

[Jeff Drumheller]

Not too sure if this will help but I have the G Skill F4 3600C16 GVK (Rip Jaws V) and I was able to load the XMP and get Windows installed on the F5e Bios. 3600,16,16,16, etc everything on auto. I haven't had any time to do proper stability testing yet but this is a much welcome improvement vs previous 2 generations.

Sadly I think my G.Skill Trident 3600 CL17 Kit is not compatible. I might try and manually set the Ram Speed, but ultimately I just want the XMP rated speed to work and will return this kit for one on the QVL list...

This is the kit i'm using: F4-3600C17D-16GTZR
It's noted as an intel kit, but that doesn't really matter to my knowledge.

 

[Jeff Drumheller]

Rut-roh Shaggy, that may be the same kit I got from Microcenter... :O

Edit: Just checked, IT IS THE SAME KIT I GOT OH NO! Now I'm wondering if I should return it (I've got 15 days) and grab the Crucial 3600CL16 kit I originally wanted to get....

Yeah I got my Kit at MC as well. I think i'm going to go with a QVL supported kit, as I just want to set XMP and move on.

When I did some investigating into the many G.Skill 3600 kits, G.Skill make a nearly identical kit with CL18 (AMD) vs CL17 (Intel, what we have). I might give it one more try by loosening timings to see if its more compatible, but I really just want an XMP supported kit. To my understanding this kit should work, but x570 support is still too new to know for sure.

 

[Jeff Drumheller]

Only complaint is the jet engine roar of the fans (checking full RPMs on each channel perhaps) on startup - not sure if that will be addressed in the beta/final - but it's something I can live with..

I just got done setting up, the chipset fan is blaring at 3800rpm while at 45°C, not good at all.

Didn't ya'll see Matt's post at the top of the page? New "TEST" Bios with improved fan stepping, profiles and fan stop. I plan to test later tonight

 

[Jeff Drumheller]

Can you send me a picture of the serial number sticker on the kit. I'll send it to my guys to see if they have that kit in house to test or can get it.

I GOT IT TO POST XMP. I cannot believe this is what was causing it, but I had the memory in slots A1,B1 and they had to be in A2 B2 to post XMP. I cannot believe I overlooked this... FFFFFFFFFFFFFFFF

 

[Jeff Drumheller]

Works! Just sent to HQ to test.

Matt - I had them in slots A1.B1, and when I moved them over to A2.B2 they posted XMP. The manual says both orientations should work, but later on says that A2.B2 for dual channel is suggested.