[HalongPort]

Yes, I also don't care about that amp at all. The Sabre DAC itself is one of the more interesting aspects of this board.
Why would they build in a high-end DAC when they are not using it for all of the outputs.

 

[dansi]

Im sure the ESS dac is for front and back. You need it to convertor to analog audio. Where did you read it is for front only?

 

[Dibiase]

Im sure the ESS dac is for front and back. You need it to convertor to analog audio. Where did you read it is for front only?

All the official documentation I have been able to find on the spec sheet and the manual points to the amp being front panel only but I haven't seen anything about the DAC being front panel only. Doesn't make logical sense that this would be correct.

 

[Nighthog]

I misread and worded it badly. The DAC is all ports, but the AMP is front panel only.

 

[eXteR]

Im sure the ESS dac is for front and back. You need it to convertor to analog audio. Where did you read it is for front only?

I had an Aorus master.

Amp only works on front panel. Realtek panel only shows DAC level options when front panel is used.

Also comparing with Asus Xonar Dgx, that sounds a lot better than integrated audio.

That was one of the reasons why i returned it.

 

[AlphaC]

http://www.ddworld.cz/pc-a-komponen...tx-deska-i-pro-vykonny-amd-ryzen-9-cpu-4.html


4.4Ghz 12 core on the ITX board

 

[Roboionator]

hi is some information about monoblock, full cover... some compatibility from x470... or all new...

 

[bigjdubb]

I doubt they added a second dac feed the rear analog outputs. It's most likely that they didn't includ whatever cheesy options (probably headphone focused) they have in the "dac control panel" for the rear outputs that will be used for speakers.

 

[IntelHouseFire]

Does anyone here run the Elite or any of the other Aorus boards with my ram: Trident Z F4-3600C16D-16GTZR? Curious as to how stable it runs and how much you were able to OC it. Looking at Gskills own QVL list, all Aorus boards except the elite is on it.

Still undecided on motherboard, leaning towards either the elite/pro or MSI's pro carbon.

 

[pschorr1123]

@gbt Matthew,

I am still having issues resuming from sleep with this MB/ 3700X. However, only occasionally since I set the Power Supply Idle to Typical in the Bios. (prior to that it was every time I woke the pc up)

Symptoms are wake from sleep and the fans spin up and the lights come on as if all is well except the screen never turns back on. The hot keys to reset display driver do not work nor does ctrl alt delete.

The debug code is E6 which isn't listed as anything in the manual. Most helpful.

Never had any issues with sleep on my X370 build and Win 10 1709 so I'm not sure if buggy AMD AGESA or Win 10 1903 is to blame

 

[Nighthog]

@gbt Matthew,

I am still having issues resuming from sleep with this MB/ 3700X. However, only occasionally since I set the Power Supply Idle to Typical in the Bios. (prior to that it was every time I woke the pc up)

Symptoms are wake from sleep and the fans spin up and the lights come on as if all is well except the screen never turns back on. The hot keys to reset display driver do not work nor does ctrl alt delete.

The debug code is E6 which isn't listed as anything in the manual. Most helpful.

Never had any issues with sleep on my X370 build and Win 10 1709 so I'm not sure if buggy AMD AGESA or Win 10 1903 is to blame

Bios isn't ready yet. there are various issues with sleep, settings get reset/ignored from what they are set in BIOS when you use sleep and resume. All kinds of hell can then happen as voltages and whatnot can be whatever.

So my advice don't use sleep function until they sort out the bugs!

 

[dansi]

I had an Aorus master.

Amp only works on front panel. Realtek panel only shows DAC level options when front panel is used.

Also comparing with Asus Xonar Dgx, that sounds a lot better than integrated audio.

That was one of the reasons why i returned it.

Could be panel bug.
If im right, dac options should only be selection of sample rates.
Reading specs, the headphones amp mainly for auto impedance selection, like most other manufacturers config

 

[matthew87]

For those with the new Gigabyte X570 boards, how is the new UEFI BIOS interface?

I see that Gigabyte are advertising that they've overhauled their UEFI bios for the new X570/AMD4 boards.

Last time i used a Gigabyte board, some years ago, their BIOS interface was complete trash compared to Asus'.

Looking at picking up a AORUS Master, but keen to hear from owners as to how intuitive and feature rich the BIOS actually is.

 

[dansi]

Yes,how is the bios, any bugs like not going into idle mode, resume sleep problems as mentioned. Are the bugs amd issue, ie does asus also suffer from it?

I been thinking of the master. It has good power stage vrm but how about its chokes, inductors and capacitors? Asus rog advertised also on these items, and also 8 layer pcb

How is master voltage stability and heat? Any issues?
Or should we ignore all the fluff since ryzen3 doesn't over clock in first place. But will a better board maintains higher auto boost clock.

Decisions..

 

[Streetdragon]

@GBT-MatthewH
just a little question:
what are your contacts say is a good max SOC-Voltage for 24/7?
Ryzen1000+2000 was like 1.2V tops for everyday

 

[Cosminnn]

X570 AORUS PRO WIFI can NOT be found in Europe. I searched on-line retailers among Germany, France, Spain, but I could only find the "simple PRO" or the mITX version. Looking to Ultra does not bring any real upgrades over Pro WiFi for the extra 30 to 35 euros.

 

[Fahren]

I am having issues with my Elite X570. Same issue as others. When I activate XMP my computer won't boot or the bios is reseted. I have to keep XMP profile disabled.

Do you know if this issue can be solved changing configs on the bios?

Regards,

 

[panni]

I am having issues with my Elite X570. Same issue as others. When I activate XMP my computer won't boot or the bios is reseted. I have to keep XMP profile disabled.

Do you know if this issue can be solved changing configs on the bios?

Regards,

Well, the "others" mostly got answered
Set your memory voltage manually to what your XMP requires (1.35V most likely; I'd go with 1.36 to be safe).

 

[Fahren]

Well, the "others" mostly got answered
Set your memory voltage manually to what your XMP requires (1.35V most likely; I'd go with 1.36 to be safe).

Thanks, I have been looking for the solution but I couldn't find it. When I have my XMP active voltage is 1.35 but I will put it manually.

 

[pschorr1123]

Bios isn't ready yet. there are various issues with sleep, settings get reset/ignored from what they are set in BIOS when you use sleep and resume. All kinds of hell can then happen as voltages and whatnot can be whatever.

So my advice don't use sleep function until they sort out the bugs!

Gotcha!