[Streetdragon]

After 2 hourse of gaming/netflix an chilli get the following "boosts"

like isaid, singlescore performence is garbage with the 1004B bios

 

[Streetdragon]

Am i the only one that has Problems with reboots in Idle?
IF 3733 SOC 1.1V(Auto) VDDG 950mV VDDP 900mV

Aida Chache and ram test stable for 2 hours.

Closed aida, browser and after some secounds my rig reboots. Seems to be a problem with idle and waking up cores or so.

Yes ram is stable. Cache should be ok too..... something else is triggering the reboots

 

[Streetdragon]

I flashed the T0D Bios on my Master.

The ccx clockind is working, only the voltage wont stuck at the enterd value. Jumping all over the place like stock PBO clocking!

 

[Streetdragon]

Hello everyone.

The screen breaks like this when I try to turn on and turn on the frequency with CCX. system never turns on. If I choose all core, there is no problem. system full stable. I don't know why CCX does it like this. when this happens, I have to use ryzen master.


I wanted to give information..

to aggressive clocking?

editd: befor you start with ccx clocking: load defaultsin bios and than enter the clocks.

 

[Streetdragon]

The feels.... hurts

 

[Streetdragon]

Yep. No coil whine for me.
And Ram.
I run my Ram at 3733 cl14 with 1.5V VDIMM (B-Die) 4x8Gig

happy little camper here

 

[Streetdragon]

enable xmp and enjoy^^

 

[Streetdragon]

can only see F11 as latest bios

 

[Streetdragon]

yeah for elite. Master has nothing new

 

[Streetdragon]

Sound cracking with mem/IF overclock? not enough SOC voltage.
This has nothing to do with the board or the CPU.

If you wanna run fixed voltage 24/7 i would stay under 1.3V. More at 1.28V or so.
The 1.325V that someone posted will kill your ship, if you run AVX2 or so. To much stress. Just let the CPU do its thing and PBO

 

[Streetdragon]

my chipfan does not run at all, only on bootup for a short time. Than it tops around 45-47°
I have all three NVME in use. Top for boot and the other two with 2TB drives in raid1.
No Repaste on the chipset

 

[Streetdragon]

Truly horrific design, despite the super high cost of this Motherboard.

They should be ashamed here, that is why my next purchase will never again be another Gigabyte Master product. Waste of money and their cost cutting attitude is clearly seen experienced on every level.





Hoping someone would release a replacement Gigabyte Master Chipset cooler here, then we can replace this disaster ourselves, instead of ditching it back into it's boxed packaging never to be reused again.

Please stop blame Gigabyte for you poor airflow. Good airflow results in good temps. If you dont like it, stop crying and buy something else

Chipfan never runs. Didnt replaced the chipset thermalpad.

And by the way: Every x570 board with a fac has the chipset at the same spot, get coverd by the GPU. So...........

 

[Streetdragon]

I manged to get my Samsung b-die kit up to 3733/ 1866 and have passed preliminary Mem testing. Only issue is Doom Eternal WASD control cuts out constantly on my USB keyboard. To remedy I raised cldo vddg from 1.050 to 1.075 and noticed an improvement during Doom Eternal but not acceptable yet. To confirm it was IF related I lowered RAM back down to 3600/ 1800 and Doom Eternal is as expected.

What is the safe 24/7 cldo voltage I can use to get games playable at 3733/ 1866? Any other settings to tweak that I can try?

try vddg 950 vddp 900 whats your soc?

if you have samsung b-die you can go down with trfc to 300

 

[Streetdragon]

anyone having issues with getting their old manual overclock working with the new 20b bios?

I had a stable OC from Aug 2019 on almost every bios that has come out since, now in 20b i cant get anything close to what I had, even pumping in more voltage then i had before, now i can't get to the windows loading screen.

before
3900x @ 1.325v
4.5
4.5
4.4
4.4
now i cant even get 4.4/4.3 all the way to up 1.35v

is there a new setting that im missing that might be making it unstable?

because you degraded your chip

 

[Streetdragon]

i hope so. not hte first time he goes offtopic and puking bile and hate over everything.

btw: I work preaty much at homeoffice and work remotly so i disabled a ccd and disabled the boost to save some power.
CPU rund 10° over ambient and needs around 26-30Watts(hwinfo CPU PPT)

Only "Problem" is, that the boot takes over 20 secs, befor it even reches the Biosscreen.
Like it has trouble to start with half power and without boost. Dont know^^

 

[Streetdragon]

My Master is still happy^^ Even that after drowning it in Liquid, after Loopcleaning xD

 

[Streetdragon]

nice tool for "How to kill your chip and singlecore performence"

 

[Streetdragon]

why should i test that "tool"
Just manually test all CCX for its max speed at the highest save volatge for your CPU.
Thats the Voltage that your CPU requests at the worst case prime smal.

everything above that is risky and can/will degrade the chip over time.
The CPU is smarter than 1usmus

 

[Streetdragon]

Do as you think, but remember: 1usmus is overhyped and AMD knows better what the chips can survive. But ok: Back to topic:

On the Master F30 can i manually change the fanspeed of the chipfan? Or di i only can choose between silent, balanced and performence mode on the fan

 

[Streetdragon]

My 3800/1900 seams to be stable for now!
All i did was changing the SOC voltage from a fixed voltage 1.10-1.13x TO
normal + Offset +0.04325V
LLC auto.
Results in 1.12-1.13V on the SOC
VDDG 1050(Auto). Lower = Laggs and crashes
VDDP 950 (Unchanged)

IF i give it the fixed voltage without offset it crashes and now its working.

Maybe it was all about a problem between the powerstages that caused the crashes for me