[Heuchler]

It's been fun trying but it has problems to boot/reboot. Gets stuck on [Ad] in initial post. There are some settings that help but I'm really trying to push it at the moment with this.

I can still try to switch places of the RAM sticks if that will help. I've seen users have different results depending on which slots they use for each memory stick. Need to try that next if it does anything for me.

Now I understand why you wanted to have access to more settings.

 

[Heuchler]

Did you mod the BIOS to get to those settings? Haven't seen those before.

Sorry to get you exited. Just checked and the Xtreme didn't have the NPRP BIOS (BIOS for press) based on AGESA 1.0.0.2.

Don't recommend anybody running the pre-release BIOS for their daily. Just found a bunch of interesting settings in the BIOS

Since X570 does support 128GB of memory (32GB DIMMs) it does make a very interesting Threadripper alternative.

 

[Heuchler]

Does anyone configure and get it stable with X570 Aorus Pro and Hynix CJR(DR module)?

I tried to configure F4-3600C19D-32GSXWB as DDR-3600 and 3533 using Ryzen DRAM Calculator 1.6.0.3,
but it couldn't POST with any setting.(BIOS ver=F4i,CPU=R7 3700X,DRAM:FCLK:UCLK=always 1:1:1)

If someone knows stable setting,please tell me it...

1). try a little higher DRAM voltage (1.40)
2). Check your VDDG and VDDP voltages (too low and I have issues with POST).
3). procODT 43.6
4.) CADBUS 24 24 24 24


Hynix CJR 2xDR or 4xSR don't seem too much different that 2xSR on X570

Little write up on Memory OC on AORUS X570. Hope it helps.
https://www.overclock.net/forum/28071804-post2.html

 

[Heuchler]

Windows 10 1903 Audio Stutter Bug (Causing DPC Latency) Microsoft Fix under KB4505903 - https://support.microsoft.com/en-in/help/4505903/windows-10-update-kb4505903

download link - https://www.catalog.update.microsoft.com/Search.aspx?q=KB4505903

I haven't had any problems with audio on 1903. Hope it helps some. Should rollout with on next patch day.

 

[Heuchler]

For specific problems I suggest going through tech support. If numerous people are having the same issue and I have steps to reproduce it I can look into it. I cannot escalate any/every issue or it will bog down the system. That's literally what tech support is for. Doing double work - well creates double work. Which in turn takes twice the time. The forums are supposed to be for community support. It's about spreading tribal knowledge. In the past 20 pages or so its turned more into people asking how to do basic stuff - many of which are covered on the first page - or reporting very specific issues with very little information. Personally I'd really like to see people sharing more information / experience / work arounds and if you do have a problem do a little investigation, try to find steps to reproduce, research, and share your findings. This thread could be condensed to half of what it is if people searched and/or circulated the information we have discovered over the past nearly 2 months since launch.

Just this. +Rep for the GBT rep

 

[Heuchler]

What's the meaning of various EDC limits for the different motherboards in the x570 Aorus line-up?
Mine, the pro, seems to be 140a, and it seems to show as 100% in Ryzen Master regardless of my manual overclock, 4.1 or 4.3 or higher per-ccx all seem to be pegged at 100% during full load.
(Please don't misunderstand, it does idle at 10% EDC, this isn't that problem)

105W Matisse : TDC = 140A/EDC=95A/PPT=142W
65W Matisse B: TDC = 60A/EDC=90A/PPT=87.8W
45W Matisse H: TDC = 45A/EDC=65A/PPT=60.8W

 

[Heuchler]

I also tested a 16GB Corsair Vengeance 3200CL16 Kit. [email protected] is also not possible! Either this Board really hates!!!!! Hynix Ram or something else is wrong.

I have Hynix CJR (SR) work fine on XMP at 3600 @19-20-20-20-40.



I run them at 3800 @16-20-20-20. Somebody else with a X570 Master has 4x8GB CJR at 3800.


Doing Custom Memory Timings is pretty easy on the X570 AORUS boards. And performance better. Tried to make a easy guide.
https://www.overclock.net/forum/28071808-post4.html

 

[Heuchler]

@GBT-MatthewH While we are waiting for the next amd fix , if you prepare a new bios plz take a look if you can include the option of the cpu temp to the debug led to the aorus master, i dont know if it technical possible to the gigabyte ( because i have it to my asus and asrock ) but its a good addition , thanks a lot and sorry im repeating myself if cant be done its ok

DataGhost.Com turned his program into a service (so it doesn't need Admin permission when Windows loads each time)

"service so that it auto-starts on boot. It needs HWiNFO running in order to read sensors. It'll automatically try to detect your CPU temperature but you can basically set it to display any sensor you want as long as the range makes sense (so that's a no to voltages at the moment, they'll basically display as 00 or 01). Just read the files in the installation dir. It should actually work on any motherboard with a POST code LCD, not just this one"


Download link: https://sigyn.dataghost.com/TempLCD.msi


X570 Aorus Master POST code temperature display

 

[Heuchler]

Thanks mate i will try it right away but it would be even better if @GBT-MatthewH could include it in the next Bios so we can have the option from the motherboard / bios itself

Taking away resource from things like getting new BIOS version build on new AGESA or delaying them doesn't seem like it is worth it at this stage. GIGABYTE has been the first to release BIOS for Matisse for all their AM4 boards.




On-Screen Display with RivaTuner/AfterBurner or Radeon Performance Overlay is a good option. Alternative one can use a RPI 5-inch or 7-inch screen case mounted to display HWiNFO or Open Hardware Monitor - https://openhardwaremonitor.org


How to add a 5" hardware monitor to your PC (For less than $50)
https://www.reddit.com/r/buildapc/comments/6gpo43/how_to_add_a_5_hardware_monitor_to_your_pc_for/


View attachment 93468
https://www.reddit.https://www.over...ents/b7nm0b/monitoring_screen_inside_pc_case/

 

[Heuchler]

Bitspower monoblock for GIGABYTE X570 Aorus Ultra
https://shop.bitspower.com/index.php?route=product/product&path=67_97_359&product_id=7379

 

[Heuchler]

I had an Ultra and a Master.
The Ultra worked temporarily then died (I think it took the PSU with it on the way out) and required RMA, the Master has one bad segment in the Debug LED, which I'll live with.
I'm probably just unlucky. But it could have been a problem with Quality Control in the rush to get early boards out.
The working board has been very good, it all pretty much just works.

You sure that it wasn't the other way around. The PSU took the motherboard out.

 

[Heuchler]

No…of course not...

We miss GBT-MatthewH..:sadsmiley

Greetings,
Medizinmann

He did make the RYZEN 3000 launch experience one of the best. Anybody willing to go onto forums after work and try to help the community is in it because he likes what he does.

Pretty happy with the choice of new Public Relations Manager over at AMD.