[Streetdragon]

the VRM on the Master are more than fine.
CTR is the biggest pile of scrap on the internet. Pls stop praying the buby to the sky for CRAP

The MasTer BoArd VrM arE BaD BecAusE tHe BuBbY iS SayIng iT.

It has a reason that AMD dont wanna work with him.

Just undervolt the CPU a bit and play around with PBO -> Better performance.

 

[Streetdragon]

Why dont you want the vdrop? Do you wanna kill your CPU with voltage spikes?
ohman.....
Pls kill you Hardware but PLS stop recommend that to others and if you still wanna do it, pay them the replacment hardware. Looks like it you have enough money to buy boards and chips all over

 

[Streetdragon]

I have the master and I'm running a 3800X with 4x8Gb G Skill 4000CL17.

My memory configuration is currently 3733mhz 15-15-15-15-30 at 1.45V

I'm able to run 3800Mhz but no matter the timings or voltage, I get a crash from time to time, so I believe I got a chip which can't handle 1900Mhz on the infinity fabric so decided to keep it a 3733 and is rock solid. By the way I'm still using the box cooler, will get a custom loop on black friday.

Regarding the board, I didn't like the position of the chipset fan since the GPU completely blocks it and the MSI implementation appears to be much better. Another thing I hate about the board is the time to boot, which takes roughly 20 seconds until the OS starts to load.

Regarding issues, I had a problem when I got the board 1 year ago when my PC went to sleep but got fixed right after so no complaints on BIOS stability.

The last point is that I can't make this board go above 3800mhz on the memory using all 4 banks. Not sure if it is a limitation of the board itself or the CPU memory controller.

In the end, I think I would go for the MSI MEG due to chipset position and the heatpipe linking the chipset and the VRM heatsink, but overall I quite liked the Gigabyte board. I would give it a 4 out of 5, only wished to achieve a better performance when using all the 4 memory slots.

If by any means you are using a vertical mount for the GPU, the chipset location is not an issue at all.

Cheers.

whats your SOC Voltage? Try setting the SOC voltage to normal/1.1V and give it a little offset of +0,025V or so

 

[Streetdragon]

Hi,
I am one of the few lucky one who got their hand on a 5900x. I know the IOD did not change on the 5900x, and previously with my 3900x I was not able to hit 1900FCLK stable. I know the 5000 series is rumored to be able to hit 2000Fclk, but I am not concern about that right now until the next Bios. All I want right now is to be able to hit 1900Fclk on the 5000 series, with my current memory and for the life of me I can't seem to do it. I am hoping I can get some suggestion on settings I can try in Bios to get to 1900Fclk.

Below is my build:
CPU - 5900x
MB - Aorus Master 570x
BIOs - 31E
Memory - G.Skill F4-3200C14-16GTZ
VC - 1080ti

BIOs Voltages/Setting:
VDDP - 1150mv
VDDG CCD - 1000mv
VDDG IOD - 1150mv
SoC - 1.25 (I know this is a little high, but I want to set it to a value where I can safely assume the SoC isn't what is stopping me from booting into 1900fclk before tuning it lower)
DIMM - 1.45v (I know this is high as well, but same idea as about)
SoC load line is set to - Turbo
Soc Current Protection - 400
Phase Control - Extreme

Everything else is on AUTO, I can get to 3733 with no issues, but i just can't hit 3800 for some reason. My 5900x has everything on AUTO with just PBO = 200 and 2x scalar.

View attachment 2465031

Read from some Zen3 User, that they are unable to boot 1900fclk, but got right into windows with 2000 and higher!

Give it a shot. Bios is bugged as hell. AGESA is bugged

 

[Streetdragon]

What do you guys do with your board and CPU? I've never seen a single WHEA error on this board (X570 Xtreme). Whatever I do with it, it either POST or doesn't. If it posts, test either fails with an error or reboots. (if it does not pass) No WHEA errors. BIOS F31e,j,k nothing.

On Intel platform that I've been used to over the last decade, WHEA errors were a good sign. It meant 'close to stability' just need bit more fine tuning (ie. voltage).

maybe its a problem with zen3? I can boot or not with my zen2. Or get a reboot after some hours of gaming. No 3800 for me.....

 

[Streetdragon]

I tried 1T with GDM enabled and 2T GDM disabled.
Results are almoust identical. 2T gives litlebit better latency, but read, write and copy are lower. Tried 3-4x each benchmark. Btw, in Aida64 if you doubleclick latency result windows it only test latency, if you doubleclick Memory name, then it benchmarks all memory windows.
RAM is Patriot ViperSteel 4400 4x8GB

1T GDM Enabled
View attachment 2467692
2T GDM disabled
View attachment 2467693
But still best is IF2033 51.9 latency and over 60000MB/s copy.
View attachment 2467694

That are some nice results! Congrats^^

 

[Streetdragon]

What motherboard do you use? and is it 5900x? His aorus master has none of the problems im having it seems. his 5900x wrecks my 5950x in single core. First thing i noticed on his 5900x is his will boost all the time seeing jumps to 4.8 even while just sitting at desktop in cpuz, my 5950x and aorus master (same board) just sits at 3.6ghz and has dips to 3.1ghz... Which makes no sense the multiplier is 36 LOL
View attachment 2468226 Completely stock 5900x with his XMP profile enabled everything else 100% optimized defaults.... Same motherboard as me for my 5950x and mine scores 667 identical settings.

whats your enegry profile in Windows? Use the AMD Ryzen High Power

 

[Streetdragon]

i think my 3900x is dying. Not even 3733Mhz/1833Mhz is stable anymore.
Worst
Potato
Chip
Ever

Hope i can buy a 5900x in 2021.... maybe April or so

 

[Streetdragon]

didnt played around the PBO or core voltage / LLC.
I give it a little undervolt scince beginning. No edc bug or whatever, because it boosts max to 4550. Once in a while, when the moon shines. Worst Day1 Chip ever.
Dont wanna give it more voltage. Potato is potato^^

 

[Streetdragon]

didnt played around the PBO or core voltage / LLC.
I give it a little undervolt scince beginning. No edc bug or whatever, because it boosts max to 4550. Once in a while, when the moon shines. Worst Day1 Chip ever.
Dont wanna give it more voltage. Potato is potato^^

nevermind. even jedec is not stable. Chip is dead from undervolting and gaming^^
Ok not dead. Just not stable over long stress tests

 

[Streetdragon]

Hi.

Have you more info on this?

4G Encoding and Re-sizable BAR Support...

I have no clue what this is. What needs to be done to have this working? And what dose it do? Try to Google it but don't find any good explanation...

Skickat från min SM-G973F via Tapatalk

in the bios, under settings -> io-Ports
there are the two options. Dont know if it works

 

[Streetdragon]

After reading the latest problems here... i think my cpu is ok, but the board god killed by the biosupdates. Flashing back is not working. GG. Last Gigabyte board for me.....

 

[Streetdragon]

Pls stop.... open a new thread for that "tool" and kill your chips there

 

[Streetdragon]

F31q solved my USB problems so far. The Curve Optimizer is only working with zen3 as far as i know

 

[Streetdragon]

some timings missmatsching with other?

 

[Streetdragon]

New Realtek Beta Driver that fixes the disconnect issue for Realtek 2.5GbE controller.

Big thanks to Svet - the admin of MSI forums, for providing the Beta release asap.

MSI Global English Forum

...

forum-en.msi.com

Install_Win10_10046_Win8_8083_Win7_7137_Installer_1037_2.7z

drive.google.com

nice thx!
Funny though, with the Intel NIC i get error logs, that it disconnects from time to time and with the realtec NIC i have no problems

 

[Streetdragon]

tha max i can boot with F31 is 1900/3800. IF wont go higher. Mem can boot with 1900/4000.
Pls Gigabytebuild a good bios

 

[Streetdragon]

this. And there is a "hole" after 1900. 1933 wont work, but 2000 could. That is strange^^

 

[Streetdragon]

wow nice^^ So who is brave enough to try it xD

 

[Streetdragon]

View attachment 2480925 I have a question. Will or should gpu work, if I connect gpu via riser card 1x to pci-e 1x port on motherboard?

should work. Miners run there GPUs on a x1 Slot. Gaming will be a problem with that lane count