[Streetdragon]

my 5800X and master on F33a can do 4000/2000 Ram and IF, BUT with whea errors while testing. And from time to time it needed two tries for booting.
Well it can work. I hope agesa can help in the future

 

[Streetdragon]

So you have your IF @2200Mhz? Screen or didnt happend^^

edit: ahh nevermind. 4650G

 

[Streetdragon]

Guys with the latest bios,

I'm able to set 2033 FCLK and not facing any hard crash or reboots during gaming, the issue I think was the latest chipset drivers which screwed my chip. I reverted to F11 bios and it still crashed with the latest chipset drivers, luckily I had the previous chipset drivers and now it is not crashing and even the ports and everything works fine. I'm just facing some audio crackle which seems to be resolved by increasing vddp and vddg volts,
View attachment 2484390

Side note: Running 4 sticks of mixed RAM, Hynix CJR and Micron Rev E!

slowly i think, buy x570 was a bad bad idea. B550 can hit higher fclk/if more often-.-

 

[Streetdragon]

For the moment this is my final setup with my Ryzen 9 5950X, 2x16GB 3200CL14 G.Skill Trident.Z, GB X570 Aorus Xtreme Rev1.0 and F32 bios:

• CPU-/Soc-LLC: low
• PBO: 120/0/180 TDC/EDC/PPT, Scalar auto
• CO: 0 -5 +5 -5 0 -5 0 -5 -15 -5 -15 -15 -15 -15 -15 -15
• AutoOC: +0MHz
• Idle Current Control: Low Current Idle
• CPPC/CPPC prefered/C-States: enabled
• RAM-Tuning as shown in attachement

Not on the edge regarding performance but it is completely stable with everything I tested (incl. several CoreCycler SSE/AVX2 Small/Large/Huge-FFT runs).

With F33 I will test 4G-Decoding/ReBAR, but for now PNY didn't release a RTX3090 ReBAR capable VBIOS, so I have to wait.

do you get any performanceboosts with the PBO 0 trick in combination with CO? And you use PBO without a Mhz+ offset?