[CaptnJones]

@PopReference @CaptnJones
For those who have audio crackling issues when overclocking memory (or maybe crackling in general?) For me it helped to raise VCORE SOC.


But be wary of the issue I stated here: https://www.overclock.net/forum/28097046-post1427.html


So always check if the voltage increase is actually applied. It might also help to use load line calibration for VCORE SOC without raising VCORE SOC voltage.

I'm getting audio crackling even when i have bios optimized settings loaded. The sound cracks, sometimes freezes and is completely out of synch the other time. Also when I for instance stop the video playback on youtube It's like the pc freezes for a second. I'm also issues with reboots happening because of kernel power error 41. I've tried 2 different psu's. Still happening
I've aleady talked with the shop and im sending the parts back for rma.

 

[ryajin]

Also didn't see the voltage setting issue you mention on the F5I bios.

Interesting. What mainboard do you have? I am on F5I too. (Thinking about sending my mainboard back because I suspect a faulty mainboard)

 

[Yuke]

If you install anything m.2 in the 3rd slot or any pciex slot ,your graphic card will drop to x8
happened to me ,so I don't use 3rd slot and 2nd pciex x8

Are you sure about this?

I asked Gigabyte support via E-Mail before buying the Aorus Master and they said first PCI-E slot should always run x16 as i doesnt share anything with the M.2 slots.

I run 3x M.2 but really dont know where i can check if my PCI-E runs in x16 or x8...where can i check this?

 

[GBT-MatthewH]

Are you sure about this?

I asked Gigabyte support via E-Mail before buying the Aorus Master and they said first PCI-E slot should always run x16 as i doesnt share anything with the M.2 slots.

I run 3x M.2 but really dont know where i can check if my PCI-E runs in x16 or x8...where can i check this?

He is incorrect. Tech support is correct as the top slot does not share with any M.2. You can check on the front page. We have PCIe diagrams showing you what shares with what... You can check with GPU-Z

Useful Docs
PCIe Diagrams: https://drive.google.com/open?id=193tSL7U6VwPwnWYm4NPdjQQ3xZwShiAD

 

[S_Bodi]

I noticed that on my X570 Master that if you set Optimized Defaults (or similar, can't remember exact name) BIOS setting. That it will reserve 256 meg or so of ram. I think it is for loading BIOS into ram. I don't know how to turn off Optimized Defaults if you have set it. After the last time I flashed my BIOS it was off and I had only turned it on by accident before.

So if you go into your resource monitor, how much hardware reserved and installed ram does it show now (assuming you are running Win 10)?

 

[BlueFllame]

Hey RAINFIRE,

Thanks for the advice, but this a brand new build with a fresh Windows install. All of the drivers have been updated. I took the audio drivers directly from Gigabyte's website.

I'm not the only one who randomly gets these issues so I hope the company looks into them.

 

[Matrixvibe]

Try going to Device Manager, right click on the device, Properties, Driver, Update Driver. That should fix it.

That's one of the first things I tried. It said the best drivers are already installed. And I even tried uninstalling it. Didn't work.

Wasn't able to find any standalone USB drivers or else I would try installing one.

Thanks

 

[clancy2k]

.//////////

 

[bigcid10]

Are you sure about this?

I asked Gigabyte support via E-Mail before buying the Aorus Master and they said first PCI-E slot should always run x16 as i doesnt share anything with the M.2 slots.

I run 3x M.2 but really dont know where i can check if my PCI-E runs in x16 or x8...where can i check this?

I know the top Pciex_16 runs at x16
but the if you put anything in the 2nd Pciex_8 slot ,your videocard in the top slot drops to x8
as well as if you put any M.2 in the 3rd bottom m.2 it will run at x2 not x4

 

[Moparman]

Anyone with Sound issues I ran into this the other night playing with different updates on windows. It seems like it is a windows issue and not the board or board software. I had to make a new usb install drive and start over and install the drivers from the Mobo disk. everything is working on my Master. Sorry for the lack of posts and support from me as we just welcomed a new baby. @GBT-MatthewH Maybe you all can look into the sound card issues for a non re install fix for the master?

 

[Eastrider]

Hello, 3 quick questions about the X570 Aorus Pro;

1. Is it normal behaviour for the AMD Overclocking menu (and any settings from Ryzen Master) not to be reset on a CMOS clear? Where are they stored? What's the best way to "reset" them in case of unstability?
2. Is it possible to manually change which BIOS are you using with the board's two BIOS chips?
3. The fan headers are up to 24W (12V, 2A). If I have a 35W water pump, would it be possible to connect two headers in parallel to the pump for a combined 12V, 4A output?

 

[unknownlimit]

Seems fine to me.
Still, if I disable CSM in the bios it reverts back to enabled after a reboot (without booting into windows).
Any other ideas?

Well I tested today with HDMI and it works now. I'm guessing it's the motherboard's Uefi(bios) Displayport implementation/handshake. The HDMI in my monitor only supports up to 120hz instead of 144hz using Displayport. @samesame, try with a HDMI cable and turn off both monitor and pc and turn everything back on and see if you can get csm disabled working.

I found a link from nvidia's forums with a user having similar issue and the user had a Gigabyte AM4 motherboard but I'm not sure if that user was able to fix it.

https://www.nvidia.com/en-us/geforce/forums/discover/274483/gtx-1080-cannot-boot-in-uefi-mode-w-displayport-output/

I'm not sure how widespread is this issue and if other users have noticed this issue.

@GBT-MatthewH
Hopefully you can help us with this issue?

 

[ericchaipc]

I have the 3900x and the Master as well. How did you guys hit the advertised boost clocks? I only hit 4.5 on 1 core

Highest boost clock i can see is 4.55 . Running on x570 Master with 3900x . Bios is F5G. F5I seems to not having the same boost clock speed.

 

[IntelHouseFire]

Anyone with Sound issues I ran into this the other night playing with different updates on windows. It seems like it is a windows issue and not the board or board software. I had to make a new usb install drive and start over and install the drivers from the Mobo disk. everything is working on my Master. Sorry for the lack of posts and support from me as we just welcomed a new baby. @GBT-MatthewH Maybe you all can look into the sound card issues for a non re install fix for the master?

What kind of sound issues? If you have an unstable memory overclock that can lead to some crackling/interruptions.

 

[Disassociative]

Hello, 3 quick questions about the X570 Aorus Pro;

1. Is it normal behaviour for the AMD Overclocking menu (and any settings from Ryzen Master) not to be reset on a CMOS clear? Where are they stored? What's the best way to "reset" them in case of unstability?

I’ve wondered this too, it seems like they persist and only reflashing the BIOS seems to clear them.

 

[Nighthog]

I’ve wondered this too, it seems like they persist and only reflashing the BIOS seems to clear them.

Load Optimized defaults.

 

[samesame]

Well I tested today with HDMI and it works now. I'm guessing it's the motherboard's Uefi(bios) Displayport implementation/handshake. The HDMI in my monitor only supports up to 120hz instead of 144hz using Displayport. @samesame, try with a HDMI cable and turn off both monitor and pc and turn everything back on and see if you can get csm disabled working.

I found a link from nvidia's forums with a user having similar issue and the user had a Gigabyte AM4 motherboard but I'm not sure if that user was able to fix it.

https://www.nvidia.com/en-us/geforce/forums/discover/274483/gtx-1080-cannot-boot-in-uefi-mode-w-displayport-output/

I'm not sure how widespread is this issue and if other users have noticed this issue.

@GBT-MatthewH
Hopefully you can help us with this issue?

I also have a a TV connected to the HDMI.
I'll try to unplug the monitor (DP) and only leave the TV connected and if that doesn't do it I'll try the monitor via HDMI to see if this has any effect on CSM.

On a side note, I hate that HDMI has priority over DP on boot. I always have to turn on the TV to mess with bios settings.
edit: I did some searching and apparently disabling CMS on other boards solves this annoyance. Another reason to get this sorted!

 

[andytom69]

my Build 3900x aorus x570 I

hi guys ..
I'm about to finish my work on the ryzen platform, everything turned on immediately and I updated to the last bios, it's a very microscopic job ..I have to finish fixing the wiring, the good thing is that the components I chose speak with rgb fusion aorus, but not the power thermaltake
I installed the system in 5 minutes, everything seemed ok until I added the amd drivers nvexpress of the controller disk m2 mp600 and updated to the latest drivers the platform, I then received the blue screen ... in the evening I try to fix however the impressions seem to me good

this is my work
https://drive.google.com/open?id=1uQ2L4dqCkv6x6uP1NangEL_L7iQsdLGp

 

[henson0115]

no, Is that a 10Gb nic ?

no, i was just curious as it uses an internal usb header, but only uses half of the socket, so was just curious if you maybe you plugged it in upside down. but since not then it wont be that.

 

[Disassociative]

Load Optimized defaults.

So I guess the procedure to get a complete clean slate then is clear CMOS for the BIOS stuff then load optimised defaults to get the AMD stuff back to stock?