Overclock.net banner

621 - 640 of 1269 Posts

·
Registered
Joined
·
110 Posts
X570 AORUS XTREME BIOS F31h
 

·
Registered
Joined
·
251 Posts
Ballistix MAX BLM2K16G40C18U4B
DDR4-4000MHz CL18 16GBx4 64GB
Ryzen9 5950X
X570 AORUS XTREME BIOS F31h

IF2000 Good!
Did you test R20 or R23, CPU-Z with 3600 setting and with 4000 vs. i had less power also on CPU-Z with higher clocks then 3600.
 

·
Registered
Joined
·
43 Posts
Ballistix MAX BLM2K16G40C18U4B
DDR4-4000MHz CL18 16GBx4 64GB
Ryzen9 5950X
X570 AORUS XTREME BIOS F31h

IF2000 Good!
Not sure if the kit will permit it but have you tried knock down the TCKE? got mine at 1 but I am on a 3200 b-die kit @ cl16 3800mhz.
 

·
Registered
Joined
·
251 Posts
Not sure if the kit will permit it but have you tried knock down the TCKE? got mine at 1 but I am on a 3200 b-die kit @ cl16 3800mhz.
can you post your setting and volts... could not get the same kit if 2x16 = 32GB running. I did buy 2nd Kit CL16-36-36-36 that is faster at 3600 xmp. or you still on 3950X ?
 

·
Registered
Joined
·
1,496 Posts
YAY! 1933FCLK works again in F31h Bios, might have done also on F31g if I put the same settings there.

Key settings are VDDG_IOD 1100-1150mv & LN2 mode + 1.200VSOC.
VDDG_CCD, somewhere in the 950-1000mv should do.

EDIT: Audio issues, need to tune voltages.
 

Attachments

·
Registered
Joined
·
43 Posts
can you post your setting and volts... could not get the same kit if 2x16 = 32GB running. I did buy 2nd Kit CL16-36-36-36 that is faster at 3600 xmp. or you still on 3950X ?

Ya im on a 3900x, mine are the flarex cl14's. Heard its hit or miss with these ones but must have hit the jackpot with 2 kits working.

Screenies for you ( sorry bout the quality, im in bed and dont wanna wake the dragon lol):

2465760
2465761
 

·
Registered
Joined
·
251 Posts
Yeah also had 3900X but you need to upgrade BIOS F30 was very good for me. Well i had 32gb with 2x16 3600kit. I did get nice Speed also from CTR from 1usmus with the 3900x, i did post some back here. Was post 502...
 

·
Registered
Joined
·
43 Posts
YAY! 1933FCLK works again in F31h Bios, might have done also on F31g if I put the same settings there.

Key settings are VDDG_IOD 1100-1150mv & LN2 mode + 1.200VSOC.
VDDG_CCD, somewhere in the 950-1000mv should do.

EDIT: Audio issues, need to tune voltages.

Audio issues you say??....dont suppose you were like me and got forced onto windows 20h2 2009?

Nothing but dpc latency problems for me since booting up a fresh 20h2 install. Spread spectrum and hpet tinkering in BIOS as well as dynamic tick and platform clock tweaks in OS helped....never eliminated it though.

I really should just copy what ive said in the last 3 threads regarding ryzen audio but....

I disabled hpet and spread in bios along with c-states, audio issues were less frequent. I used latencymon and saw gpu was spiking hard with dpc (5ms) and audio crackling.

Applied disabled dynamic tick and all that jazz. Unplugged my sound blaster after enabling 10-bit tag and tbt (hope tbt is also 10 bit tag lol) and rebooted. Went back in and disabled those again and shut down. Installed sound card again and booted up...no crackles!

However the 2080ti and asus rog theta headset were still have issues (sound card is for my yamaha exclusively).

It seem the windows timer is always stuck at qpc 10 and never drops down no matter the tweak. I even tried InSpectre to remove the spectre mitigation to see....nope, just 4fps more in benches.

Whatever seudo voodoo bs MS have done in the new update is messing with drivers and its causing ppl to think its their hardware.

If you cant bear waiting for a fix from MS or cant find stability, You can get RUFUS which is the only current way i know how to get a bootable ISO for each version of win10. Even the 1909 media creator forces you to visit ms and get 20h2 media creator.

I have my new pro cd key and plan to disable via group policy the ability to update and set business update to 1909 static.

Hopefully I can report back here with success tomorrow after i wake up.

Note: ten bit tag is needed for pcie 4 IIRC, so if you have 6000 radeon or 3000 rtx dont touch it, just pray lol.
 

·
Registered
Joined
·
251 Posts
hey I also had the sound issue but I think is only for 5000 series when you do OC for ram... with stock XMP setting no issues... never had it on 3900x, so only 5000 series i think you need more volts... but hard to tell how much is good. the new ram is 1.45 3600 and 1.5v for 3800 that is for 5000 series. An it was with 1909 also by the way...
 

·
Registered
Joined
·
251 Posts
in case you guys did not see it there was a new chipset driver for 5000 series on gigabyte website...

AMD Chipset Driver
(Note) Win10 ver.2004 supported.
(Note) For AMD Ryzen 5000 series processors support

gigabyte

i did install that a few days back but audio problem did not go away when oc. And funny i was faster in C20 and CPU.Z with XMP then with 3800 as if not crashed when i was lucky
 

·
Registered
Joined
·
1,496 Posts
Audio issues you say??....
FCLK instability cause audio issues on Ryzen.
VDDG_IOD is most effective on adjustment, but also VDDG_CCD for a little less adjustment.
VDDG_IOD is the trouble voltage on my system that needs tuning to solve this particular issue, audio crackle and hiss & audio dropouts. If system freezes for short moment it's usually VDDG_CCD.
LLC & VSOC voltage might have a slight significance on severity, just test combinations until you figure out how you system responds to voltage changes.

I find running a memory test + playing back Youtube 4K video triggers it and is my troubleshoot guide to check which settings are better or worse.
Most simple thing is just to back off on your FCLK frequency if you have issues, but I like to tune my system to the edge and do the work required to fix stability issues.
 

·
Registered
Joined
·
251 Posts

·
Registered
Joined
·
260 Posts
Yeah... so i did order the new Ryzen 5000 RAM to test and see if its better, I should get it in 2 days.

Its 1.45v at 3600 CL-14-15-15-35


and i maybe order the crazy one also...but not out yet here


1.5v 3800 CL14-16-16-16

so i can see what is better as i am not sure.


I had to make same exact decision. Upon consulting with some overclockers here, I opted for 1.45v at 3600 CL-14-15-15-35. Exact same kit you linked. I can't claim anything for sure but based on input I get I decided for it. My goal is to push 3933 with lowest timings.
 

·
Registered
Joined
·
251 Posts
yeah we see, i was also not sure. Just that timing on 3800 was lower kind a did not know how to see proof. The other kit will be more money also, and now not stock. We see were it goes and if the fix the bios also soon
 

·
Registered
Joined
·
545 Posts
Good.
Did you try to shift the RAID 0 to drive 0&1 - as this would make a lot more sense...just saying...;)

He is talking about PCIe 4.0 RAID - but in the end the same applies to your setup since it is better to run one SSD over the CPU directly and one over chipset...

Best regards,
Medizinmann
Hi. sorry, I missed your post.
Well.. frankly speaking, I'm not after sequential transfer rate which I think is meaningless numbers for my gaming rig. If I was after sequential transfer rate numbers, I would've bought 980 Pro instead of 970 Pro. IMO, 970 Pro is better NVMe than 980 Pro.
This may be my OCD. :p I set 970 Pro (disk0) in a single volume on its own (and pair disk1 and disk2 970 Pros for RAID0 through X570 chipset) since it is directly connected to CPU so that I could avoid latency disparity between direct connection and through X570 connection. :)
 

·
Registered
Joined
·
545 Posts
I tried 1900 MHz IF clock yesterday. So far, it has passed 6 hours of GSAT and 10 hours of Karhu RAM Test, knock on wood.

2465799
 

·
Registered
Joined
·
251 Posts
Not happy with BIOS F31h had a lot WHEA errors when gaming...
 

·
Registered
Joined
·
251 Posts
I don't think its different then the f31h from yesterday...still same letter. Well they had to rush to make SAM working. I think we will see more version soon. Many error were reported with this version.
 
621 - 640 of 1269 Posts
Top