[newls1]

I have been pulling my hair out for the last week trying to figure out why my board after OC applied boots only 50% of the time, but when it does boot, stability is fine. kept adding voltage to the CPU (4790k) applied as much as 1.30v and still wouldn't boot but 50% of time still. Got to paying **CLOSE** attention to everything inside this bios and came across the boot strap options (1.00 / 1.25 / 1.66) I applied 1.25 strap and adjusted the cpu oc and memory accordingly and so far after 10 or so reboots IT BOOTS 100% OF THE TIME. Im using the latest F8 bios too.

Just wondering from other members here that have this board what strap are you using and has anyone else came across this problem like me? I even am trying to lower my Vcore (@ 1.295v now) and so far so good, gonna keep trying lower though. Uncore is at 4.0 @ 1.190v too. Opinions would be great guys, and THANKS

 

[newls1]

PC is freezing up on me now... pretty sure i need to learn how to set the finer voltages like:

system agent
VRIN (voltage reg in)
VROUT (Voltage reg out)
analog / digital voltages......

any help here would be fantastic..

the options i have for the above are in (+0.0000) format so im clueless there