Overclock.net banner

1 - 2 of 2 Posts

·
Registered
Joined
·
7 Posts
Discussion Starter #1
I got my 690 today !

but..

I can not seem to get all 3 catleap monitors to be detected.

Looking at the rear of the card:

I can get 2 (top right / bottom left) to be detected and work. but not the top left.

If I just connect the top left and not connect any other monitors it will work.

If i connect the top right and top left , only the top right will be detected.. ?

I was under the impression that this card could do 3x dvi out for surround

I know all cables and ports are good from troubleshooting. I just cant get all 3 to output at one time.

any help would be appreciated.
 
1 - 2 of 2 Posts
Top