Overclock.net banner
1 - 20 of 54 Posts

·
Registered
Joined
·
258 Posts
Discussion Starter · #1 ·
whats going on here? why do my temps getthis high, im using the 71.24 drivers, anyone have any suggestions? tnaks!
 

·
Banned
Joined
·
4,410 Posts
Quote:

Originally Posted by andy_s_1
whats going on here? why do my temps getthis high, im using the 71.24 drivers, anyone have any suggestions? tnaks!
is it reading both cards as 1 temp or are you getting 2 temps 1 for each card
 

·
Registered
Joined
·
258 Posts
Discussion Starter · #5 ·
Quote:

Originally Posted by ItsLasher
is it reading both cards as 1 temp or are you getting 2 temps 1 for each card
2 seperate readings the second one is always a bit lower, not alot like.
what drivers are he best then??
 

·
Premium Member
Joined
·
8,208 Posts
if you want a temp gun then please don't throw away all that cash, get one of these instead:
http://www.tempgun.com/main.html

i use the $25 one for my monitor (lizard) all the time and never had a problem.
 

·
Premium Member
Joined
·
3,859 Posts
Quote:


Originally Posted by andy_s_1

im gpoing to install the original drivesr see what happens


try the xtreme g 75.90 beta.....good stuff
 

·
Premium Member
Joined
·
3,859 Posts
Quote:

Originally Posted by andy_s_1
so i souldnt be worried about 90 deg C?? seems pretty high
not for a gpu.
 

·
Registered
Joined
·
258 Posts
Discussion Starter · #12 ·
hehe taa, im managed to get it to 70ish hope it stays that way, im going to install some more case fans aswell as ducting
keep it cool
 

·
Banned
Joined
·
2,956 Posts
Quote:

Originally Posted by Bi0s
use the 71.81's they are the best
different for everyone and for every card. i noticed you havent posted any overclocks yet andy. im curious as to how much you can get out of that system...
 

·
Banned
Joined
·
19 Posts
Quote:

Originally Posted by Waffles
different for everyone and for every card. i noticed you havent posted any overclocks yet andy. im curious as to how much you can get out of that system...

good point
 

·
Registered
Joined
·
258 Posts
Discussion Starter · #19 ·
ok running now, lets see!
whats the best/safest way to start ocing this rig (its allnew so nothing has been done yet)
 

·
Premium Member
Joined
·
3,859 Posts
Quote:

Originally Posted by andy_s_1
ok running now, lets see!
whats the best/safest way to start ocing this rig (its allnew so nothing has been done yet)
what cooling do u have?
 
1 - 20 of 54 Posts
Top