Overclock.net banner

GPU not supported or current driver flag, again :(

4088 Views 32 Replies 13 Participants Last post by  The Duke

I had to do a shut down and now the single 8800GT is giving me the FAH flag that the GPU is not supported or the driver is not! This is with just one card installed.
It worked fine with a single card untill I did a reboot a few days later.

Many of you read my last post on this when both twin 8800GT cards were installed with the two step device/driver install when the second card would raise the fah flag 'GPU/driver issue.

I've been through the appropriate method of driver removal in the OS and in safe mode with DCC Pro.
Tried both 182.06 & 181.20 drivers with the full driver removal.
using -gpu 1 for the single card in set up

What the heck am I doing wrong

Also, I have been using the second GPU client (Sys tray for Nvidia) in the advanced download section and had also tried the first one (Sys tray) too.

Correct me if I'm wrong, but the third GPU client XP/2003 GPU Console is not the client to use for multiple GPU clients.
1 - 1 of 1 Posts

· Premium Member
4,963 Posts

Originally Posted by The Duke
View Post

Actually, I did try that too
when I was fighting the second card not coperating with the fah GPU not supported flag.

Is that a must?

Not sure about XP, but in Vista if I don't extend the desktop to the dummy plugged one I get the same error.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.