Overclock.net banner

1 - 1 of 1 Posts

·
Premium Member
Joined
·
8,564 Posts
Discussion Starter #1
So, I was digging through my syslog and doing a SMART test through gsmart when I noticed smartd reported two things that gsmart did not report as errors

Code:

Code:
May 20 17:06:43 Failboat-Mobile smartd[746]: Device: /dev/sda [SAT], SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 120 to 99
May 20 17:06:43 Failboat-Mobile smartd[746]: Device: /dev/sda [SAT], SMART Usage Attribute: 195 ECC_Uncorr_Error_Count changed from 100 to 120
Gsmart however never showed the first numbers that smartd shows and only shows the second numbers and no errors. What the heck does that mean? This is an SSD I just put into my laptop and it never hinted at problems in my desktop. Is there reason to be concerned here?
 
1 - 1 of 1 Posts
Top