Overclock.net banner

1 - 20 of 1518 Posts

·
Registered
Joined
·
985 Posts
Discussion Starter #1
<span style="font-size:24px;"><span style="color:#008B00;"><span style="color:#008B00;"><span style="color:#008B00;"><b><span style="text-decoration:underline;">THIS THREAD IS FOR H SERIES COOLER CASE COMPATIBILITY - HAVE ANOTHER QUESTION? THEN GO TO THE <span style="font-size:16px;"><a class="bbcode_url" href="http://www.overclock.net/t/612436/official-corsair-hydro-series-club">OCN OFFICIAL CORSAIR HYDRO SERIES CLUB</a></span><br></span></b></span></span></span></span><br><span style="color:#008B00;">***NOTE - REFERENCE H80i & H100i COOLERS*** Please Read<br><br>
I will now include the new "i" Series coolers. They are almost the same with regards to size which let's face it, is all the matters to this thread.<br>
The only noticeable difference is that due to the new thicker tubes, the reservoir on the end of the radiator has been increased very slightly. I haven't seen a single setup where this would make a difference.<br><br>
I am waiting for clarification that the tubes are the same length.<br><br>
From now on, when a link is specifically to an "i" series cooler, I will name it as such</span><br><br>
I know there are threads for the H80 & H100 coolers, and threads for individual cases. However, this doesn't stop the numerous threads with people asking if this cooler will fit in their case, normally as a new thread!<br><br>
Please keep in mind this is only based on the info provided by other forum users and I accept no liability for any mistakes! The thread is only for a summary of compatibility, not for discussion into HXXX versus air cooling or tech help etc.<br><br>
I will keep this page updated in the first post and summarise all the info, all I require is the info from you via PM or in the thread to include:<br><br>
Case manufacturer, model, version<br>
H80 or H100<br>
Position<br>
Summary of any mods required or close calls on fitting (i.e. might not suit everyones HW)<br><br>
If you want the info to point to a specific post with pics etc then please provide the link to that post only, not the entire thread.<br><br>
If you wish to include any other closed loop water cooling systems (antec etc) then let me know.<br><br><b><span style="color:#FF0000;">Thanks for all info so far - Please try and include a link or a picture with your info if you can so people viewing this thread have a reference!<br>
If you notice any broken links please let me know so I can update them!</span></b><br><br><br><b><span style="text-decoration:underline;"><span style="font-size:24px;"><span style="color:#0000FF;">H80 & H80i</span></span></span></b><br><br><b>COOLER MASTER</b>
<div class="bbcode_indent" style="margin-left:4em;"><span style="color:#0000FF;">CM690 Std</span><br>
Fits Rear in P/P configuration - <a class="bbcode_url" href="http://www.overclock.net/t/294838/the-cooler-master-690-club/16560_20#post_16293274">LINK</a><br>
Does not fit top, makes contact with MB heatsink and RAM with some HW. May be okay with other MBs.Adv versions of the case have a bit more room, but check first.<br><span style="color:#0000FF;">CM690 II Adv</span><br>
Fits in rear without modding - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h100-case-compatibility-thread-page-1-for-full-listings/360_20#post_16937883">LINK</a><br><span style="color:#0000FF;">Storm Enforcer (SGC-1000-KWN1)</span><br>
Fits Rear without issue. <a class="bbcode_url" href="http://www.overclock.net/15562943-post59.html">LINK</a> & <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h100-case-compatibility-thread/160#post_16088693">LINK</a><br><span style="color:#0000FF;">Storm Scout</span><br>
Fits in Push/Pull - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h100-case-compatibility-thread/110#post_15920939">LINK</a> - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h80i-h90-h100-h100i-h110-case-compatibility-thread-page-1-for-full-listings/620#post_19363424">H80i</a><br><span style="color:#0000FF;">Storm Sniper</span><br>
Fits rear and top fan mounts, awaiting pics.<br><span style="color:#0000FF;">HAF 912</span><br>
Will fit rear fan mount. - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h80i-h100-h100i-case-compatibility-thread-page-1-for-full-listings/520#post_19091871">H80i</a><br>
Custom mod for front - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h100-case-compatibility-thread/300_20#post_16482479">LINK</a><br><span style="color:#0000FF;">HAF 922</span><br>
Fits in rear - <a class="bbcode_url" href="http://www.overclock.net/15392684-post31.html">LINK</a><br><span style="color:#0000FF;">HAF 932</span><br>
Fits rear fan mount - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h100-case-compatibility-thread/140#post_16041987">LINK</a><br><span style="color:#0000FF;">Cosmos S</span><br>
Should fit, with some caveats/restrictions - See <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h100-case-compatibility-thread/80#post_15680926">LINK</a><br><span style="color:#0000FF;">Elite 430</span><br>
Fits on rear fan mount, may be HW dependant - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h100-case-compatibility-thread/180#post_16117571">LINK</a><br>
Rear Mounted - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h80i-h90-h100-h100i-h110-case-compatibility-thread-page-1-for-full-listings/790#post_19999289">H80i</a><br><span style="color:#0000FF;">Elite 431</span><br>
Fits in the rear mount, might be HW dependant - See <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h80i-h90-h100-h100i-h110-case-compatibility-thread-page-1-for-full-listings/600#post_19308141">LINK</a><br><span style="color:#0000FF;">Silencio</span><br>
Fits on rear mount without issue - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h100-case-compatibility-thread/130#post_16011381">LINK</a></div>
<br><b>SILVERSTONE</b>
<div class="bbcode_indent" style="margin-left:4em;"><span style="color:#0000FF;">RAVEN 3</span><br>
Fits, please view <a class="bbcode_url" href="http://www.overclock.net/15483269-post48.html">LINK</a><br><span style="color:#0000FF;">TJ10</span><br>
Fits on rear fan mount - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h100-case-compatibility-thread/100#post_15873023">LINK</a><br><span style="color:#0000FF;">TJ08-E</span><br>
Fits, limited room - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h100-case-compatibility-thread/130#post_16005809">LINK</a> & <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h100-case-compatibility-thread-page-1-for-full-listings/420_20#post_17330528">LINK</a><br><span style="color:#0000FF;">FT03</span><br>
Fits on rear fan mount - <a class="bbcode_url" href="http://www.overclock.net/t/541767/club-for-those-with-beastly-matx-itx-rigs/2560_20#post_14601939">LINK</a><br><span style="color:#0000FF;">Fortress FT01</span><br>
Fits on rear mount in push/pull - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h100-case-compatibility-thread-page-1-for-full-listings/480#post_18316313">LINK</a></div>
<br><b>CORSAIR</b>
<div class="bbcode_indent" style="margin-left:4em;"><span style="color:#0000FF;">200R</span><br>
Fits rear in push pull, no issues - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h80i-h90-h100-h100i-h110-case-compatibility-thread-page-1-for-full-listings/880#post_20306553">H80i</a><br><span style="color:#0000FF;">500R</span><br>
Fits rear, no issues - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h100-case-compatibility-thread/170#post_16101274">LINK</a><br><span style="color:#0000FF;">600t</span><br>
Fits top but require modding for P/P configuration as per H100 <a class="bbcode_url" href="http://www.overclock.net/water-cooling/1083046-pics-corsair-h100-600t.html#post14449891">LINK</a><br><span style="color:#0000FF;">650D</span><br>
Fits - <a class="bbcode_url" href="http://www.overclock.net/15540544-post51.html">LINK</a><br><span style="color:#0000FF;">300R</span><br>
Fits rear, no issues - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h80i-h90-h100-h100i-h110-case-compatibility-thread-page-1-for-full-listings/820#post_20117562">H80</a></div>
<br><b>NZXT</b>
<div class="bbcode_indent" style="margin-left:4em;"><span style="color:#0000FF;">Phantom (please see details, different versions are unconfirmed!)</span><br>
Fit in the front - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h100-case-compatibility-thread/170#post_16101274">LINK</a> (PIC SHOWS H50, but H80 will also fit)<br>
Fits in the rear - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h80i-h90-h100-h100i-h110-case-compatibility-thread-page-1-for-full-listings/720#post_19827033">H80i</a><br><span style="color:#0000FF;">Source 210</span><br>
Fits on rear mount - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h80i-h90-h100-h100i-h110-case-compatibility-thread-page-1-for-full-listings/660#post_19532120">H80i</a></div>
<br><b>Thermaltake</b>
<div class="bbcode_indent" style="margin-left:4em;"><span style="color:#0000FF;">Armor A60</span><br>
Fits rear mount - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h100-case-compatibility-thread-page-1-for-full-listings/340_20#post_16573703">Link</a><br><span style="color:#0000FF;">Armor (VA8000BWS)</span><br>
Fits in Push/Pull - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h100-case-compatibility-thread/90#post_15804170">LINK</a><br><span style="color:#0000FF;">Armor (VH6001)</span><br>
Fits but not as Push/Pull inside the case, see link, also may be possible to have one fan external<a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h100-case-compatibility-thread/190#post_16179152">LINK</a><br><span style="color:#0000FF;">V9 Black</span><br>
Fits rear fan mount - <a class="bbcode_url" href="http://www.overclock.net/t/1206729/gday-all#post_16310731">LINK</a><br><span style="color:#0000FF;">Element G</span><br>
Fits, no issues - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h100-case-compatibility-thread/260_20#post_16411604">LINK</a></div>
<br><b>ANTEC</b>
<div class="bbcode_indent" style="margin-left:4em;"><span style="color:#0000FF;">Antec NSK6000 / 6500 / 6580 / 6580b</span><br>
Fits rear. - <a class="bbcode_url" href="http://www.imagebam.com/image/9c5389150712153" target="_blank">LINK</a><br><span style="color:#0000FF;">200</span><br>
Fits rear mount in P/P but may be HW Dependant - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h100-case-compatibility-thread-page-1-for-full-listings/340_20#post_16615636">LINK</a><br><span style="color:#0000FF;">300</span><br>
Fits rear in push pull - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h100-case-compatibility-thread-page-1-for-full-listings/320_20#post_16551683">LINK</a><br><span style="color:#0000FF;">900</span><br>
Fist rear with minor mod to side panel clip - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h100-case-compatibility-thread/180#post_16120166">LINK</a> & <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h80i-h100-h100i-case-compatibility-thread-page-1-for-full-listings/520#post_19088800">H80i</a><br><span style="color:#0000FF;">1100</span><br>
Fits on rear mount - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h100-case-compatibility-thread/140#post_16013780">LINK</a><br><span style="color:#0000FF;">1200</span><br>
Fits rear fan mounts, using bottom my affect other components - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h100-case-compatibility-thread-page-1-for-full-listings/340_20#post_16581321">LINK</a><br><span style="color:#0000FF;">P183 V3</span><br>
Fits top or rear - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h100-case-compatibility-thread/150#post_16052659">LINK for REAR</a><br><span style="color:#0000FF;">LanBoy Air</span><br>
Fits in P/P - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h100-case-compatibility-thread-page-1-for-full-listings/380_20#post_17139394">LINK</a></div>
<br><b>FRACTAL DESIGN</b>
<div class="bbcode_indent" style="margin-left:4em;"><span style="color:#0000FF;">Define XL</span><br>
H70 Fits in rear as P/P, H80 should also fit. <a class="bbcode_url" href="http://www.overclock.net/14850847-post7.html">LINK</a><br><span style="color:#0000FF;">Define Mini</span><br>
Will fit but may be HW dependant - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h100-case-compatibility-thread-page-1-for-full-listings/400_20#post_17226904">LINK</a><br><span style="color:#0000FF;">Arc Midid</span><br>
Fits rear fan mount - <a class="bbcode_url" href="http://forums.overclockers.com.au/showpost.php?p=13440020&postcount=12" target="_blank">LINK</a><br><span style="color:#0000FF;">R2 & R3</span><br>
Fits in rear - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h100-case-compatibility-thread/80#post_15690771">LINK</a><br>
Additional R3 - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h100-case-compatibility-thread-page-1-for-full-listings/380_20#post_17028251">LINK</a><br><span style="color:#0000FF;">R4</span><br>
Fits in front, link is for H60 but H80 should work the same - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h100-case-compatibility-thread-page-1-for-full-listings/470#post_18260506">LINK</a><br><span style="color:#0000FF;">Core 1000</span><br>
Should fit, see comments in <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h100-case-compatibility-thread/130#post_16011446">LINK</a> - Also confirmed now may fit with losing some of the vertical drive mountings - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h100-case-compatibility-thread-page-1-for-full-listings/340_20#post_16688090">LINK</a><br>
Fits in the front with some modding - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h80i-h90-h100-h100i-h110-case-compatibility-thread-page-1-for-full-listings/640#post_19429613">H80i</a><br><span style="color:#0000FF;">Core 3000</span><br>
Fits on rear fan mount - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h100-case-compatibility-thread/100#post_15890757">LINK</a></div>
<br><b>LIAN Li</b>
<div class="bbcode_indent" style="margin-left:4em;"><span style="color:#0000FF;">PC-7FN</span><br>
Fits but need to remove rubber grommets from fan mount - Awaiting link<br><span style="color:#0000FF;">PC-7FNWX</span><br>
Fits on rear mounts if you remove the rubber gromets see - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h80i-h90-h100-h100i-h110-case-compatibility-thread-page-1-for-full-listings/640#post_19455470">H80i</a></div>
<br><b>CaseLabs</b>
<div class="bbcode_indent" style="margin-left:4em;"><span style="color:#0000FF;">SM8</span><br>
Will fit on rear mount or on top mount - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h80i-h100-h100i-case-compatibility-thread-page-1-for-full-listings/490#post_19005359">LINK</a></div>
<br><b>ASUS</b>
<div class="bbcode_indent" style="margin-left:4em;"><span style="color:#0000FF;">TA-D2</span><br>
Tight squeeze, but fits - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h100-case-compatibility-thread/100#post_15818551">LINK</a></div>
<br><b>AZZA</b>
<div class="bbcode_indent" style="margin-left:4em;"><span style="color:#0000FF;">Solano 1000</span><br>
Fits on rear mount, both fans internally may impact side panel fan - See <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h80i-h100-h100i-case-compatibility-thread-page-1-for-full-listings/550#post_19159935">LINK</a></div>
<br><b>BITFENIX</b>
<div class="bbcode_indent" style="margin-left:4em;"><span style="color:#0000FF;">Prodigy</span><br>
Fits on rear mount, See <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h80i-h90-h100-h100i-h110-case-compatibility-thread-page-1-for-full-listings/700#post_19746862">H80i</a></div>
<br><b>Rosewill</b>
<div class="bbcode_indent" style="margin-left:4em;"><span style="color:#0000FF;">Thor V2</span><br>
Fits on rear mount without issues, See <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h80i-h90-h100-h100i-h110-case-compatibility-thread-page-1-for-full-listings/690#post_19668954">H80i</a></div>
<br><b>Zalman</b>
<div class="bbcode_indent" style="margin-left:4em;"><span style="color:#0000FF;">Z12</span><br>
Fits on rear mount without issues, See <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h80i-h90-h100-h100i-h110-case-compatibility-thread-page-1-for-full-listings/720#post_19827033">H80i</a> & <b><a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h80i-h90-h100-h100i-h110-case-compatibility-thread-page-1-for-full-listings/720#post_19824451">H80i</a></b></div>
<br><br><b><span style="text-decoration:underline;"><span style="font-size:24px;"><span style="color:#0000FF;">H90 (140mm Version of H80)</span></span></span></b><br><br><b>Fractal</b>
<div class="bbcode_indent" style="margin-left:4em;"><span style="color:#0000FF;">Define R4</span><br>
Fits on rear mount without issues - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h80i-h90-h100-h100i-h110-case-compatibility-thread-page-1-for-full-listings/840#post_20173360">H90</a></div>
<br><b><span style="text-decoration:underline;"><span style="font-size:24px;"><span style="color:#0000FF;">H100 & H100i</span></span></span></b><br><br><b>COOLER MASTER</b>
<div class="bbcode_indent" style="margin-left:4em;"><span style="color:#0000FF;">CM690 Std</span><br>
Fits in base if HDD cage is partially removed, be careful that water pipes are long enough to reach CPU over graphics card.<br>
Fits in the top without modding - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h80i-h100-h100i-case-compatibility-thread-page-1-for-full-listings/560#post_19218696">H100i</a><br>
Fits i the top with very light modding dependant on hardware. See <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h80i-h90-h100-h100i-h110-case-compatibility-thread-page-1-for-full-listings/700#post_19750856">H100i</a><br><span style="color:#0000FF;">CM690 II Advanced</span><br>
Fits in base - Requires removing some of HDD cage - <a class="bbcode_url" href="http://www.overclock.net/15001519-post15879.html">LINK</a> & <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h100-case-compatibility-thread/170#post_16109254">LINK(Shroud)</a><br>
Fits in top as P/P using top fan mounts without issue, but is HW dependant. - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h100-case-compatibility-thread/80#post_15690051">LINK</a><br>
Fits on top of case in P/P with some heavy modding - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h100-case-compatibility-thread/60#post_15669017">LINK</a><br>
Fits in bottom in P/P + Some shrouds with some modding - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h100-case-compatibility-thread/70#post_15675289">LINK</a><br>
Top Mounted Push Only - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h80i-h90-h100-h100i-h110-case-compatibility-thread-page-1-for-full-listings/790#post_19979816">H100i</a><br>
Bottom Mounted - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h80i-h90-h100-h100i-h110-case-compatibility-thread-page-1-for-full-listings/940#post_20449394">H100i</a><br><span style="color:#0000FF;">Centurion 590</span><br>
Fit in top in Push or Pull - Heavy modding required for P/P - <a class="bbcode_url" href="http://techgage.com/article/cooler_master_centurion_590/2" target="_blank">Ext link</a><br><span style="color:#0000FF;">Elite 430</span><br>
Fits top with modding for push or pull only. - see <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h80i-h90-h100-h100i-h110-case-compatibility-thread-page-1-for-full-listings/720#post_19799462">H100i</a><br><span style="color:#0000FF;">HAF 912</span><br>
Fits top with some modding for P/P - see <a class="bbcode_url" href="http://www.overclock.net/water-cooling/1138459-corsair-h100-cooler-master-haf-912-a.html#post15255329">link</a> - read full thread comments.<br><span style="color:#0000FF;">HAF X</span><br>
Fits top without modding<br>
Some modding may be required for P/P, may fit some cases without modding, HW dependant. - <a class="bbcode_url" href="http://www.overclock.net/water-cooling/1138459-corsair-h100-cooler-master-haf-912-a.html#post15255329">LINK</a><br><span style="color:#0000FF;">HAF 922</span><br>
Fits top in Push or Pull but require minor modding - <a class="bbcode_url" href="http://www.overclock.net/t/612436/official-corsair-hydro-series-club/19900#post_16137952">LINK</a><br><span style="color:#0000FF;">HAF 932</span><br>
Fits Push or Pull - <a class="bbcode_url" href="http://www.overclock.net/water-cooling/1079493-corsair-h100-pics-review-benchmark.html">LINK</a><br>
P/P Confirmed - <a class="bbcode_url" href="http://www.overclock.net/15478120-post46.html">LINK</a><br>
P/P confirmed, top 230mm may need to be removed if complete P/P configuration will not fit inside with hardware, check first.<br><span style="color:#0000FF;">Storm Sniper</span><br>
P/P Confirmed with one on top, waiting on confirmation of 2 fans fiting - <a class="bbcode_url" href="http://www.overclock.net/t/1193579/h100-how-noticable-is-the-change-in-fan-speed#post_16085078">LINK</a><br><span style="color:#0000FF;">Storm Scout</span><br>
Fits in front with heavy modding - <a class="bbcode_url" href="http://www.overclock.net/t/1098440/h100-in-a-storm-scout#post_14832968">LINK</a><br>
Fits in top as push or pull, tight fit asnd component dependant - <a class="bbcode_url" href="http://www.overclock.net/t/1209056/h100-can-fit-in-a-storm-scout#post_18922039">LINK</a><br><span style="color:#0000FF;">Storm Scout 2</span><br>
Fits in the front with some modding - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h80i-h90-h100-h100i-h110-case-compatibility-thread-page-1-for-full-listings/560#post_19202966">LINK</a> & Alternative method <a class="bbcode_url" href="http://www.overclock.net/t/525009/official-the-coolermaster-storm-scout-scout-ii-club/27530#post_19823259">LINK</a><br>
Top Mounted without modding - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h80i-h90-h100-h100i-h110-case-compatibility-thread-page-1-for-full-listings/850#post_20229270">H100i</a><br><span style="color:#0000FF;">Storm Stryker</span><br>
Fits in the top - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h80i-h90-h100-h100i-h110-case-compatibility-thread-page-1-for-full-listings/620#post_19352479">H100i</a><br><span style="color:#0000FF;">Cosmos II</span><br>
Fits in top in push or pull - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h80i-h100-h100i-case-compatibility-thread-page-1-for-full-listings/510#post_19083954">LINK H100i</a></div>
<br><b>SILVERSTONE</b>
<div class="bbcode_indent" style="margin-left:4em;"><span style="color:#0000FF;">Raven 02</span><br>
Will fit P/P if case fans removed but not required, P/P possible using case fans - <a class="bbcode_url" href="http://i52.tinypic.com/2z6dv7p.jpg" target="_blank">LINK</a><br><span style="color:#0000FF;">Raven RV-03</span><br>
Fits in 5.25 drive bays with modding - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h100-case-compatibility-thread/100#post_15815300">LINK</a><br><span style="color:#0000FF;">TJ07</span><br>
Fits in top with some very light modding and a few caveats, see -<a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h100-case-compatibility-thread-page-1-for-full-listings/440_20#post_17680046">LINK</a><br><span style="color:#0000FF;">TJ10</span><br>
Fits in P/P without issue - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h100-case-compatibility-thread/130#post_16007025">LINK</a></div>
<br><b>CORSAIR - Should fit all, but check first, waiting for links to individual case installs</b>
<div class="bbcode_indent" style="margin-left:4em;"><span style="color:#0000FF;">200r</span><br>
Fits in the top with slight mod - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h80i-h90-h100-h100i-h110-case-compatibility-thread-page-1-for-full-listings/940#post_20446490">H100i</a><br><span style="color:#0000FF;">300r</span><br>
Fits in Push or Pull but is hardware dependant, specifically RAM - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h100-case-compatibility-thread-page-1-for-full-listings/480#post_18766619">LINK</a><br>
Good link showing HW constraints - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h80i-h100-h100i-case-compatibility-thread-page-1-for-full-listings/530#post_19112657">LINK</a><br><span style="color:#0000FF;">400r</span><br>
Fits in Push or Pull only - Modding required for P/P setup - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h100-case-compatibility-thread/210#post_16258036">LINK</a><br><span style="color:#0000FF;">500r</span><br>
Fits in Push or Pull only - Modding required for P/P setup - <a class="bbcode_url" href="http://www.overclock.net/t/1130705/2500k-corsair-500r-with-h100#post_15141048">LINK</a><br>
Another Push Pull setup - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h100-case-compatibility-thread/140#post_16040691">LINK</a><br>
New info, fits P/P without modding but is hardware dependant, more specifically size of heatsinks - AWAITING LINK<br><span style="color:#0000FF;">600t SE</span><br>
Fits Push or Pull confirmed - <a class="bbcode_url" href="http://img03.imgland.net/SoAZsa8G5e.png" target="_blank">LINK</a> & <a class="bbcode_url" href="http://www.overclock.net/water-cooling/1083046-pics-corsair-h100-600t.html">LINK</a><br>
Push Pull - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h100-case-compatibility-thread/240#post_16338490">LINK</a> & <a class="bbcode_url" href="http://www.overclock.net/lists/display/view/id/3995733">LINK</a> & <a class="bbcode_url" href="http://www.overclock.net/water-cooling/1083046-pics-corsair-h100-600t.html#post14449891">LINK</a><br><span style="color:#0000FF;">550D</span><br>
Fits in the top in push or pull, P/P may be hardware dependant - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h100-case-compatibility-thread-page-1-for-full-listings/400_20#post_17219834">LINK</a><br><span style="color:#0000FF;">650D</span><br>
Fits in Push/Pull, be cautious about other components - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h100-case-compatibility-thread/110#post_15923422">LINK</a> & <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h100-case-compatibility-thread-page-1-for-full-listings/380_20#post_17125907">NEW LINK</a><br><span style="color:#0000FF;">800D</span><br>
Fits in top - <a class="bbcode_url" href="http://pc-internet-zone.blogspot.com/2011/07/how-to-install-hydro-series-h100.html" target="_blank">Ext Link (Full Intsall)</a> & <a class="bbcode_url" href="http://www.evga.com/forums/tm.aspx?&m=1146787&mpage=1" target="_blank">Ext Link (Full Install)</a> & <a class="bbcode_url" href="http://www.corsair.com/blog/corsair-link-gaming-pc-build-log/" target="_blank">LINK</a><br><span style="color:#0000FF;">C70 Military</span><br>
Fits in top - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h80i-h90-h100-h100i-h110-case-compatibility-thread-page-1-for-full-listings/780#post_19971904">H100i</a><br><span style="color:#0000FF;">C70</span><br>
Fits in top - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h80i-h90-h100-h100i-h110-case-compatibility-thread-page-1-for-full-listings/840#post_20208224">H100i</a></div>
<br><b>NZXT</b>
<div class="bbcode_indent" style="margin-left:4em;"><span style="color:#0000FF;">Phantom</span><br>
Fits Push or Pull - <a class="bbcode_url" href="http://i.imgur.com/vdlOu.jpg" target="_blank">Link</a> & <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h100-case-compatibility-thread/210#post_16232424">LINK</a><br>
Fits in Push Pull with some modingd - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h100-case-compatibility-thread-page-1-for-full-listings/320_20#post_16552705">LINK</a><br><span style="color:#0000FF;">TEMPEST 410</span><br>
Fits in the top - <a class="bbcode_url" href="http://pcper.com/reviews/Cases-and-Cooling/Corsair-H100-Liquid-CPU-Cooler-Review/Installation-Performance-Testing" target="_blank">EXT LINK</a><br><span style="color:#0000FF;">TEMPEST 410 Elite</span><br>
Fits in the top, HW dependant - <a class="bbcode_url" href="http://www.overclock.net/t/1409245/so-i-got-my-h100i-yesterday#post_20395389">H100i</a> & <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h80i-h90-h100-h100i-h110-case-compatibility-thread-page-1-for-full-listings/920#post_20395467">H100i</a><br><span style="color:#0000FF;">Phantom 410</span><br>
Fits seperating the fan and rad either side of plate - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h100-case-compatibility-thread/210#post_16238925">LINK</a> & <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h100-case-compatibility-thread/210#post_16248081">LINK</a> & Alt <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h100-case-compatibility-thread/280_20#post_16432676">LINK</a><br><span style="color:#0000FF;">Switch 810</span><br>
Fits in the top, room for push pull - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h80i-h90-h100-h100i-h110-case-compatibility-thread-page-1-for-full-listings/630#post_19386832">LINK</a><br><span style="color:#0000FF;">Gamma</span><br>
Fits top with modding - <a class="bbcode_url" href="http://www.overclock.net/t/1163799/nzxt-gamma-budget-build-2500k-gtx460-h100#post_15637733">LINK</a><br>
Fits in Push/Pull without mods - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h100-case-compatibility-thread-page-1-for-full-listings/340_20#post_16661107">LINK</a></div>
<br><b>ANTEC</b>
<div class="bbcode_indent" style="margin-left:4em;"><span style="color:#0000FF;">300</span><br>
Will fit in front with some quite heavy modding - <a class="bbcode_url" href="http://www.overclock.net/15189036-post1.html">LINK</a><br>
Can be fitted in 3.5" bays with some modding - <a class="bbcode_url" href="http://www.overclock.net/case-mod-work-logs/1133653-h100-inside-antec-300-pics.html">LINK</a> - Thanks pale<br><span style="color:#0000FF;">1200</span><br>
Will fit on rear in P/P - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h100-case-compatibility-thread/240#post_16319767">LINK</a> & <a class="bbcode_url" href="www.overclock.net/water-cooling/1079868-h100-antec-1200-case.html">LINK</a> & <a class="bbcode_url" href="http://www.xbitlabs.com/articles/coolers/display/corsair-h100_3.html#sect0" target="_blank">EXT LINK</a> - H100i<br>
Fits in the top - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h80i-h90-h100-h100i-h110-case-compatibility-thread-page-1-for-full-listings/730#post_19831795">H100i</a><br>
Top Mounted - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h80i-h90-h100-h100i-h110-case-compatibility-thread-page-1-for-full-listings/730#post_19831795">H100i</a><br>
Push Pull setup, rear mounted - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h80i-h90-h100-h100i-h110-case-compatibility-thread-page-1-for-full-listings/810#post_20063281">H100i</a><br><span style="color:#0000FF;">900</span><br>
Will fit in the front without modding at the loss of some bays - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h100-case-compatibility-thread-page-1-for-full-listings/380_20#post_17218988">LINK</a><br><span style="color:#0000FF;">Dark Fleet (DF) 85</span><br>
Yes, with mods - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h100-case-compatibility-thread/70#post_15680896">LINK</a><br>
Push Pull without modes confirmed - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h100-case-compatibility-thread/260_20#post_16415518">LINK</a><br><span style="color:#0000FF;">Lanbot Air</span><br>
Fits in front, full install guide - <a class="bbcode_url" href="http://www.overclock.net/t/1038766/official-antec-lanboy-air-case-club/1740_20#post_16814843">LINK</a></div>
<br><b>Thermaltake</b>
<div class="bbcode_indent" style="margin-left:4em;"><span style="color:#0000FF;">Level 10 GT</span><br>
Fits Push Pull - <a class="bbcode_url" href="http://www.youtube.com/watch?v=u5jDUd514IA&feature=youtube_gdata_player" target="_blank">EXT YOUTUBE LINK</a> & <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h100-case-compatibility-thread/280_20#post_16432975">LINK</a> & <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h100-case-compatibility-thread-page-1-for-full-listings/490#post_18966894">NEW LINK</a><br>
Fits Push or Pull, also shows space available for P/P config which may be HW dependant - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h100-case-compatibility-thread/140#post_16018733">LINK</a><br><span style="color:#0000FF;">RX-1</span><br>
Fits in top in Push/Pull - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h100-case-compatibility-thread/320_20#post_16519730">LINK</a><br>
Fits in the top IN P/P without removing 200mm fans but may be HW dependant due to space limitations around larger RAM or heatsinks. See <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h100-case-compatibility-thread-page-1-for-full-listings/340_20#post_16647850">LINK</a><br><span style="color:#0000FF;">V4</span><br>
Fits in Push or Pull - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h100-case-compatibility-thread-page-1-for-full-listings/460#post_17971267">LINK</a><br><span style="color:#0000FF;">Armor Plus</span><br>
Fits in Push Pull custom fit - see <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h100-case-compatibility-thread-page-1-for-full-listings/340_20#post_16683697">link</a><br><span style="color:#0000FF;">Chaser Mk1</span><br>
Confirmed in Push or Pull - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h80i-h100-h100i-case-compatibility-thread-page-1-for-full-listings/540#post_19121411">LINK</a></div>
<br><b>Fractal Design</b>
<div class="bbcode_indent" style="margin-left:4em;"><span style="color:#0000FF;">Arc Midi</span><br>
Fits in top in Push or Pull<br>
P/P now confirmed without modding - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h100-case-compatibility-thread-page-1-for-full-listings/380_20#post_17048863">LINK</a> - and alternative - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h100-case-compatibility-thread/240#post_16332331">LINK</a> & <a class="bbcode_url" href="http://img189.imageshack.us/img189/2668/photo0031ec.jpg" target="_blank">LINK</a> & <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h100-case-compatibility-thread/160#post_16095272">LINK</a><br><span style="color:#0000FF;">Mini</span><br>
Can be mounted in front - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h100-case-compatibility-thread/80#post_15689783">LINK</a><br><span style="color:#0000FF;">Arc Mini</span><br>
Fits in top in push pull (lower profile rear 120mm fan required i.e. 25mm+ will not fit)- <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h100-case-compatibility-thread/240#post_16332331">LINK</a><br>
Push or Pull in the <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h80i-h90-h100-h100i-h110-case-compatibility-thread-page-1-for-full-listings/650#post_19474985">H100i</a><br><span style="color:#0000FF;">R4</span><br>
Fits in front in push or pull removing the drive cages, simple mod - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h100-case-compatibility-thread-page-1-for-full-listings/470#post_18213157">LINK</a><br>
Also fits the front in push/pull - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h80i-h90-h100-h100i-h110-case-compatibility-thread-page-1-for-full-listings/620#post_19352523">H100i</a><br>
Front and top fitting -<br>
Fits in the top without modding, HW dependant see - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h80i-h100-h100i-case-compatibility-thread-page-1-for-full-listings/560#post_19216527">LINK</a><br>
Fits without modding by offsetting the fan mounts, may be HW dependant - See <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h80i-h90-h100-h100i-h110-case-compatibility-thread-page-1-for-full-listings/660#post_19582755">LINK</a><br>
Top Push or Pull Mounted - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h80i-h90-h100-h100i-h110-case-compatibility-thread-page-1-for-full-listings/790#post_20004888">H100i</a></div>
<br><b>LIAN Li</b>
<div class="bbcode_indent" style="margin-left:4em;"><span style="color:#0000FF;">PC 50</span><br>
Can be mounted in the front in P/P with some heavy modding - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h100-case-compatibility-thread/80#post_15708207">LINK</a> - UPDATED <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h100-case-compatibility-thread/90#post_15791025">LINK</a><br><span style="color:#0000FF;">PC-V2120</span><br>
Fits in Push/Pull - may be component dependant see - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h100-case-compatibility-thread-page-1-for-full-listings/380_20#post_17127159">LINK</a><br><span style="color:#0000FF;">PC-K62</span><br>
Fits with some modding, see - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h100-case-compatibility-thread-page-1-for-full-listings/380_20#post_17127192">LINK</a></div>
<br><b>Bitfenix</b>
<div class="bbcode_indent" style="margin-left:4em;"><span style="color:#0000FF;">Prodigy</span><br>
Fits in top in Push or Pull with some caveats - See <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h80i-h90-h100-h100i-h110-case-compatibility-thread-page-1-for-full-listings/620#post_19352523">H100i</a></div>
<br><b>Rosewill</b>
<div class="bbcode_indent" style="margin-left:4em;"><span style="color:#0000FF;">Thor</span><br>
Fits in top in Push/Pull with some modiing. Modding should not be required for Push or Pull, but not yet confirmed - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h100-case-compatibility-thread/240#post_16361665">LINK</a></div>
<br><b>Azza</b>
<div class="bbcode_indent" style="margin-left:4em;"><span style="color:#0000FF;">Solano</span><br>
Fits in top in Push or Pull, Push pull possible utilising the existing built in 230mm fan without modding. See <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h80i-h90-h100-h100i-h110-case-compatibility-thread-page-1-for-full-listings/580#post_19264369">H100i</a></div>
<br><b>Zalman</b>
<div class="bbcode_indent" style="margin-left:4em;"><span style="color:#0000FF;">Z11 Plus</span><br>
Will fit in the top in push or pull with minor mods. See - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h80i-h90-h100-h100i-h110-case-compatibility-thread-page-1-for-full-listings/670#post_19599549">H100i</a></div>
<br><b><span style="text-decoration:underline;"><span style="font-size:24px;"><span style="color:#0000FF;">H110 (280x140mm Version of H100)</span></span></span></b><br><br><b>Cooler Master</b>
<div class="bbcode_indent" style="margin-left:4em;"><span style="color:#0000FF;">Cosmos 2</span><br>
Fits in top in Push/Pull using 200mm case fans, requires some light modding. See - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h80i-h90-h100-h100i-h110-case-compatibility-thread-page-1-for-full-listings/660#post_19574074">H110</a><br><span style="color:#0000FF;">HAF 932</span><br>
Fits in top with caveats - <a class="bbcode_url" href="http://www.overclock.net/t/612436/official-corsair-hydro-series-club/22750#post_19922404">H110</a><br>
Comprehensive post of top mounted <a class="bbcode_url" href="http://www.overclock.net/t/612436/official-corsair-hydro-series-club/22750#post_19922404">H110</a></div>
<br><b>Thermaltake</b>
<div class="bbcode_indent" style="margin-left:4em;"><span style="color:#0000FF;">Chaser Mk-1</span><br>
Fits in top - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h80i-h90-h100-h100i-h110-case-compatibility-thread-page-1-for-full-listings/750#post_19898136">H110</a><br><span style="color:#0000FF;">Level 10gt</span><br>
Fits in top in push or pull - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h80i-h90-h100-h100i-h110-case-compatibility-thread-page-1-for-full-listings/830#post_20143295">H110</a></div>
<br><b>Corsair</b>
<div class="bbcode_indent" style="margin-left:4em;"><span style="color:#0000FF;">carbide 300r</span><br>
Fits on top with some minor mod. See - <a class="bbcode_url" href="http://www.overclock.net/t/1307044/official-corsair-300r-owners-fan-club-and-guide-post-build-logs-and-mods/120#post_19597739">H110</a><br><span style="color:#0000FF;">Vengeance C70</span><br>
Fits in the top in push pull - See <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h80i-h90-h100-h100i-h110-case-compatibility-thread-page-1-for-full-listings/730#post_19852335">H110</a><br>
Top Mounted Push/Pull Setup - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h80i-h90-h100-h100i-h110-case-compatibility-thread-page-1-for-full-listings/730#post_19852335">H110</a></div>
<br><b>Fractal Design</b>
<div class="bbcode_indent" style="margin-left:4em;"><span style="color:#0000FF;">Arc Midi</span><br>
Fits in the front - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h80i-h90-h100-h100i-h110-case-compatibility-thread-page-1-for-full-listings/690#post_19678295">H110</a><br><span style="color:#0000FF;">Arc Midi R2</span><br>
Fits in the front, very minor mod - <a class="bbcode_url" href="http://www.overclock.net/t/1144409/h80-h80i-h90-h100-h100i-h110-case-compatibility-thread-page-1-for-full-listings/870#post_20280845">H110</a></div>
 

·
Registered
Joined
·
1,151 Posts
This is such a good idea for a thread. It would be useful to expand this to all coolers because some air coolers are too big for many cases, but I guess that would be a lot of work lol.
 

·
Registered
Joined
·
1,993 Posts
Fits in the 600t on the top. Just no push pull without modding.
 
  • Rep+
Reactions: Mattyd893

·
Registered
Joined
·
985 Posts
Discussion Starter #4
<div class="quote-container"><span>Quote:</span>
<div class="quote-block">Originally Posted by <strong>vitality;15340425</strong> <br>
Fits in the 600t on the top. Just no push pull without modding.</div>
</div>
<br>
H100 included?
 

·
Registered
Joined
·
985 Posts
Discussion Starter #5
<div class="quote-container"><span>Quote:</span>
<div class="quote-block">Originally Posted by <strong>olli3;15340415</strong> <br>
This is such a good idea for a thread. It would be useful to expand this to all coolers because some air coolers are too big for many cases, but I guess that would be a lot of work lol.</div>
</div>
<br>
Hope I'm not biting off more than I can chew already!
 

·
Registered
Joined
·
50 Posts
Fits in the Corsair 400r and 500r (basically the same case). BUT, without modding or removing the top mesh, the H100 will only fit Push or Pull and not PUSH/PULL.
 
  • Rep+
Reactions: Mattyd893

·
Registered
Joined
·
1,993 Posts
<div class="quote-container"><span>Quote:</span>
<div class="quote-block">Originally Posted by <strong>Mattyd893;15340433</strong> <br>
H100 included?</div>
</div>
<br>
Yeah. I meant the h100.
 

·
Registered
Joined
·
2,938 Posts
Actually, the H100 fitting into a 240mm rad location is no guarantee that the double thick 120mm push/pull H80 will fit. I would just remove that 99% line if I were you.<br><br>
And the H100 also fits in all the Corsair cases. (under H100, List Corsair - ALL).
 

·
Registered
Joined
·
985 Posts
Discussion Starter #9
<div class="quote-container"><span>Quote:</span>
<div class="quote-block">Originally Posted by <strong>Mergatroid;15349033</strong> <br>
Actually, the H100 fitting into a 240mm rad location is no guarantee that the double thick 120mm push/pull H80 will fit. I would just remove that 99% line if I were you.<br><br>
And the H100 also fits in all the Corsair cases. (under H100, List Corsair - ALL).</div>
</div>
<br>
Removed...Forgot about the extra bulk!<br><br>
And yes, I'm sure it will fit into all Corsair cases, but I would rather fill the info with links to OC members posts about fitting and any mods needed/possible for any given case. Does my new quote satisfy you ;-)
 

·
Registered
Joined
·
613 Posts
I was able to shroud my h50 in the front of my nzxt vulcan. I would imagine the h80 would work fine as well.
 

·
Registered
Joined
·
985 Posts
Discussion Starter #11
<div class="quote-container"><span>Quote:</span>
<div class="quote-block">Originally Posted by <strong>Xyphyr;15350929</strong> <br>
I was able to shroud my h50 in the front of my nzxt vulcan. I would imagine the h80 would work fine as well.</div>
</div>
<br>
Do you have pics of setup on here, if so can I get a link?
 

·
Registered
Joined
·
985 Posts
Discussion Starter #12
Lots of info coming in for the H100, where's all the H80 users?
 

·
Registered
Joined
·
489 Posts
Fractal Design Arc Midi + H100 in the top = Success !<br><br>
I did have a bit of trouble getting the top back on, which did cost me a plastic clip :/ , but that either got sorted by the plastic clip breaking or me tightening up the screws a bit..<br>
It fits fine even with a fan in the back, haven't tried with P/P on the radiator but I think it should fit just fine. <img alt="smile.gif" class="bbcode_smiley" src="http://files.overclock.net/images/smilies/smile.gif"><br><br><a class="bbcode_url" href="http://img189.imageshack.us/img189/2668/photo0031ec.jpg" target="_blank">http://img189.imageshack.us/img189/2668/photo0031ec.jpg</a>
 

·
Registered
Joined
·
291 Posts
I have the H80... haven't tried installing it yet... anyone know if it will fit properly as the rear exaust on my haf922?
 

·
Registered
Joined
·
55 Posts
@ Russ369, it should but can't confirm. You can also put it on the top <img alt="smile.gif" class="bbcode_smiley" src="http://files.overclock.net/images/smilies/smile.gif"><br><br>
I have a H100 on HAF 932 with Push and Pull configuration <img alt="smile.gif" class="bbcode_smiley" src="http://files.overclock.net/images/smilies/smile.gif"><br>
No need to mod the case, just need to remove the top 230mm fan.
 

·
Registered
Joined
·
985 Posts
Discussion Starter #16
Any more?
 

·
Registered
Joined
·
985 Posts
Discussion Starter #18
<div class="quote-container"><span>Quote:</span>
<div class="quote-block">Originally Posted by <strong>iOverclock;15374709</strong> <br>
So, even if I were to remove the two 200mm fans in the top of the NZXT Phantom, P/P on the H100 would still not fit?</div>
</div>
<br>
All the info I have seen for the Phantom so far have been either push or pull.<br><br>
You could try looking at or asking over at the official OC Phantom thread:<br><a class="bbcode_url" href="http://www.overclock.net/computer-cases/876350-official-nzxt-phantom-club.html">http://www.overclock.net/computer-cases/876350-official-nzxt-phantom-club.html</a>
 

·
Data Recovery Engineer
Joined
·
20,222 Posts
I have the H100 in the top 2 fan mounts on my 690 II with no issues.
 
  • Rep+
Reactions: Mattyd893
1 - 20 of 1518 Posts
Top