Overclock.net banner

1081 - 1100 of 1518 Posts

·
Registered
Joined
·
22 Posts
H110 mostly fits a NZXT Phantom 410 for push or pull but not push & pull unless you have a smaller than ATX motherboard. (requires a slight case mod to adjust screw holes)<br><br>
<a href="http://www.overclock.net/t/1428193/build-log-dark-phantom-nzxt-phantom-410-haswell-4770k-h110-cooler-overclock-delid">http://www.overclock.net/t/1428193/build-log-dark-phantom-nzxt-phantom-410-haswell-4770k-h110-cooler-overclock-delid</a><br><br><a class="H-lightbox-open" href="http://www.overclock.net/content/type/61/id/1666732/"><img alt="" class="lightbox-enabled" data-id="1666732" data-type="61" src="http://www.overclock.net/content/type/61/id/1666732/width/350/height/700/flags/LL" style="; width: 350px; height: 247px"></a>
 

·
Registered
Joined
·
15 Posts
NZXT Phantom Full Tower<br>
H100i<br>
1) With top 200mm fans: With fans in push OR pull, attaches with mounting brackets (little room and does not work with high profile ram).<br><br>
2) Without top 200mm: Fits in Push And pull (4 fans) and can be mounted to the case directly. It runs much colder than the other setup ~10C colder, but will require the drilling of new holes. (mounting holes are off by 1/4 inch.)
 

·
Questionnaire galore!
Joined
·
6,123 Posts
<div class="quote-container" data-huddler-embed="/t/1144409/h80-h80i-h90-h100-h100i-h110-case-compatibility-thread-page-1-for-full-listings/1080#post_20842317" data-huddler-embed-placeholder="false"><span>Quote:</span>
<div class="quote-block">Originally Posted by <strong>Alamists</strong> <a href="/t/1144409/h80-h80i-h90-h100-h100i-h110-case-compatibility-thread-page-1-for-full-listings/1080#post_20842317"><img alt="View Post" class="inlineimg" src="/img/forum/go_quote.gif"></a><br><br>
NZXT Phantom Full Tower<br>
H100i<br>
1) With top 200mm fans: With fans in push OR pull, attaches with mounting brackets (little room and does not work with high profile ram).<br><br>
2) Without top 200mm: Fits in Push And pull (4 fans) and can be mounted to the case directly. It runs much colder than the other setup ~10C colder, but will require the drilling of new holes. (mounting holes are off by 1/4 inch.)</div>
</div>
So it's going to be 120fans right?<br><br>
Fan<br>
Case<br>
Radiator<br>
Fan<br><br>
?
 

·
Registered
Joined
·
105 Posts
H110 possible to fit Overseer RX-I ? Anyone tried ?
 

·
Registered
Joined
·
15 Posts
<div class="quote-container" data-huddler-embed="/t/1144409/h80-h80i-h90-h100-h100i-h110-case-compatibility-thread-page-1-for-full-listings/1080#post_20842353" data-huddler-embed-placeholder="false"><span>Quote:</span>
<div class="quote-block">Originally Posted by <strong>Speedster159</strong> <a href="/t/1144409/h80-h80i-h90-h100-h100i-h110-case-compatibility-thread-page-1-for-full-listings/1080#post_20842353"><img alt="View Post" class="inlineimg" src="/img/forum/go_quote.gif"></a><br><br>
So it's going to be 120fans right?<br><br>
Fan<br>
Case<br>
Radiator<br>
Fan<br><br>
?</div>
</div>
<br>
It would be more like:<br><br>
Fan-fan<br>
Case<br>
Radiator<br>
Fan-fan<br><br>
(unless you only wanted 2 fans...)<br><br>
If you were only doing push or pull and had low profile ram you could do:<br><br>
Case<br>
Mounting Bracket<br>
Radiator<br>
Fan-fan<br><br>
And yeah, it supports only 120mm.
 

·
Registered
Joined
·
5 Posts
FYI: Didn't see this in the OP, but I've found a YouTube for a H100i in a Corsair Carbide 300R: <a href="http://www.youtube.com/watch?v=t-Ytei7axvs" target="_blank">http://www.youtube.com/watch?v=t-Ytei7axvs</a>
 

·
Registered
Joined
·
112 Posts
<b><span style="font-size:12px;">manage to fit in corsair h110 in fractal design r4.<br>
some mod is required<br>
only able to fit the 280mm radiator at the front<br>
finally manage to fit corsair h110 inside fractal design define r4<br>
tubing length is quite short for front input</span></b><br><br><a class="H-lightbox-open" href="http://www.overclock.net/content/type/61/id/1681649/"><img alt="" class="lightbox-enabled" data-id="1681649" data-type="61" src="http://www.overclock.net/content/type/61/id/1681649/flags/LL" style="; width: 720px; height: 585px"></a>
 

·
Registered
Joined
·
1,722 Posts
I fit the Corsair H110 at the top of my NZXT Switch 810 case. It fits up there quite easily in a pull configuration, and you should be able to get a push pull configuration up there as well.<br><br><a class="H-lightbox-open" href="http://www.overclock.net/content/type/61/id/1682963/"><img alt="" class="lightbox-enabled" data-id="1682963" data-type="61" src="http://www.overclock.net/content/type/61/id/1682963/width/500/height/1000/flags/LL" style="; width: 500px; height: 375px"></a>
 

·
Registered
Joined
·
72 Posts
H110 in the front of a Fractal Design Arc Midi R2 using (4) 140mm fans in push/pull. I've got a few new high static pressure fans on the way, and I believe I'm just going to end up mounting the radiator on the top of the case and keep the front as a normal air intake to keep the GPU cooler.<br><a class="H-lightbox-open" href="http://www.overclock.net/content/type/61/id/1683182/"><img alt="" class="lightbox-enabled" data-id="1683182" data-type="61" src="http://www.overclock.net/content/type/61/id/1683182/width/350/height/700/flags/LL" style="; width: 350px; height: 263px"></a>
 

·
Registered
Joined
·
152 Posts
I am running the H110 in a push configuration in a corsair obsidian 550d case it is a tight fit with the cpu power cable but it works just fine. and at idle the cpu is sitting at 28c in Phoenix Az.
 

·
Registered
Joined
·
72 Posts
<div class="quote-container" data-huddler-embed="/t/1144409/h80-h80i-h90-h100-h100i-h110-case-compatibility-thread-page-1-for-full-listings/1090#post_20908317" data-huddler-embed-placeholder="false"><span>Quote:</span>
<div class="quote-block">Originally Posted by <strong>95birdman</strong> <a href="/t/1144409/h80-h80i-h90-h100-h100i-h110-case-compatibility-thread-page-1-for-full-listings/1090#post_20908317"><img alt="View Post" class="inlineimg" src="/img/forum/go_quote.gif"></a><br><br>
H110 in the front of a Fractal Design Arc Midi R2 using (4) 140mm fans in push/pull. I've got a few new high static pressure fans on the way, and I believe I'm just going to end up mounting the radiator on the top of the case and keep the front as a normal air intake to keep the GPU cooler.<br><a class="H-lightbox-open" href="http://www.overclock.net/content/type/61/id/1683182/"><img alt="" class="lightbox-enabled" data-id="1683182" data-type="61" src="http://www.overclock.net/content/type/61/id/1683182/width/350/height/700/flags/LL" style="; width: 350px; height: 263px"></a></div>
</div>
<br>
So I got my b-gears Blaster 140mm fans in with 3.5mmH2O static pressure and mounted them in PULL pulling air from outside in through the radiator, and I have cooler temps by a few degress both idle and load. I don't have the room to mount the fans in push or push/pull. I was then able to move my HDD cage inward and mount a bottom fan for an intake, most importantly, to keep my GPU cool, because it was running warm with my last setup. Only exhaust is my rear 140mm fan. The radiator is NOT mounted properly in the correct mounting holes. In order to make everything fit I only used 3 mounting holes on the radiator. It's a pretty tight fit even without the screws so it's not going anywhere.<br><a class="H-lightbox-open" href="http://www.overclock.net/content/type/61/id/1686115/"><img alt="" class="lightbox-enabled" data-id="1686115" data-type="61" src="http://www.overclock.net/content/type/61/id/1686115/width/350/height/700/flags/LL" style="; width: 350px; height: 263px"></a>
 

·
Registered
Joined
·
3,666 Posts
the H100i also fits the Fractual R4 ontop.<br><br>
i have placed mine there however it will only have a push or pull set-up on a full atx mobo as there is not enough space between the ram and the rad.<br><br><br>
then on the rear any 120 mm rad will fit.
 

·
Registered
Joined
·
10 Posts
OP please change the compatibility for the H100/H100i for the NZXT Gamma. It looks like you meant to say that the case above it in the list (Switch 810) can do P/P without modding. The Gamma is extremely cramped around the top and back, and its only compatible with push WITH modding, and definitely couldn't do P/P unless you wanted your pull fans sitting out in the open on top of the case..
 

·
Registered
Joined
·
98 Posts
Hi there! new to overclock.net! I've read loads of threads, thought I might join. Anyways, will the Carbide Air 540 fit the h100i in push pull? I know it'll fit the h100i with stock fans. I will use the Z87-GD65 gaming mobo (sexy as hell, awesome features, love MSI) and if it matters, the Corsair Vengeance Pro red 8gb 1600mhz RAM. I hope to build a kinda dragon-themed PC.
 

·
Registered
Joined
·
1,061 Posts
<div class="quote-container" data-huddler-embed="/t/1144409/h80-h80i-h90-h100-h100i-h110-case-compatibility-thread-page-1-for-full-listings/1090#post_20946787" data-huddler-embed-placeholder="false"><span>Quote:</span>
<div class="quote-block">Originally Posted by <strong>maza90210</strong> <a href="/t/1144409/h80-h80i-h90-h100-h100i-h110-case-compatibility-thread-page-1-for-full-listings/1090#post_20946787"><img alt="View Post" class="inlineimg" src="/img/forum/go_quote.gif"></a><br><br>
Hi there! new to overclock.net! I've read loads of threads, thought I might join. Anyways, will the Carbide Air 540 fit the h100i in push pull? I know it'll fit the h100i with stock fans. I will use the Z87-GD65 gaming mobo (sexy as hell, awesome features, love MSI) and if it matters, the Corsair Vengeance Pro red 8gb 1600mhz RAM. I hope to build a kinda dragon-themed PC.</div>
</div>
<br>
I'd say that's a NO unless you want to modify the top fangrill to mount the 2 additional fans externally <img alt="redface.gif" class="bbcode_smiley" src="http://files.overclock.net/images/smilies/redface.gif"><br>
I guess you could also Mod it into the front in Push/Pull but that would negate the original excellent engineering that went into the 540's case airflow in the 1st place <img alt="rolleyes.gif" class="bbcode_smiley" src="http://files.overclock.net/images/smilies/rolleyes.gif"><br><br>
Hey Matty ... <b><a class="bbcode_url" href="http://www.overclock.net/t/1420257/build-log-corsair-carbide-air-540-haswell-build">[HERE]</a></b> is an excellent link to update the cover page for Corsair 540 / H100i <img alt="wink.gif" class="bbcode_smiley" src="http://files.overclock.net/images/smilies/wink.gif">
 
1081 - 1100 of 1518 Posts
Top