[ShawnMcGrail]

a celeron? i would unclock it and buy a better cooler, thats way too hott!

 

[ShawnMcGrail]

i would put it back down to its normal speed, that is way way way way to hott for a celeron at 3.2! i would turn it down before your comp starts to smoulder lol

 

[ShawnMcGrail]

well i dont know about the celeron you got, so i couldnt say about the voltage, but i would say put it down to about 3.0 or 2.9 to be safe, but i would say below 50full load would be best.

 

[ShawnMcGrail]

good luck lol

 

[ShawnMcGrail]

okay, thats still way too hott. your should buy an aftermarket heatsink, i would recommend the XP-120 with a good fan or the Hyper 6 with 2 tornadoes

Oh, and i would recommend lowering the Vcore more so its not that hott

 

[ShawnMcGrail]

know any good computer stores near you? and even if they dont have the products in, they could probably get them specially shipped in, and heres a link to those two heatsinks i told you about.

XP-120 = http://www.newegg.com/app/ViewProduc...109-118&depa=1
Hyper 6 = http://www.newegg.com/app/ViewProduc...103-144&depa=1

And it dosnt really matter what kind of fan you have on them, just make sure they have a good CFM and you'll be set

 

[ShawnMcGrail]

ya i know, but his celeron has got the 256k cache and 533fsb, compared to my 400FSB and 128k cache. but since his is better, he could just slap on a spark 7+ and go to like 3.3 with like 45c instead of almost 60c @3ghz