Overclock.net banner

having issues please help

793 Views 33 Replies 7 Participants Last post by  Greenback
I don have alot of time to post but this is my only chance at post it tonight.

Getting into the niddy griddy here I just purchased a new rig. It consists of the parts as follows.

P8P67 Deluxe

Intel core i7 2600k at right now 3.40 GHZ

G.Skill 8gb ripjaw x ddr3

one gtx 560 superclocked (came sced atlready)

Ralink RT61 Turbo network card

Coolermaster silent pro 1000w gold PSU

Collermaster HAF X Blue edition that does include all fans even the optional top 200mm fan.

With this here is my problems. Currently I have windos 7 x64 bit and its WORKING. What the issue is, is that my network card WILL NOT stay connected to the WRT54G router we have. This card was in my olders system and it worked fine. Also, I cant download anything as it just times out as well as looking at internet stuff. Also my ping will shoot up to over 22k in Ventrilo so I cant even use that to talk to my friends.

My only other issue is that I am getting HIGH TEMP cpu problems upon bootup. I press F1 and it starts windows 7 x64 bit normally. When i get into windows I check the following programs one at a time to see. Note that TUBO BOOST and TPU on my mobo are ON but nothing changing on my cpu, it isnt getting any boost at all and is right now stuck at the stock speed of 3.40 GHZ.

In the Bios it shows my system at 80C OR HIGHER however, in windows on THREE different programs it shows my system at

27C-38C, this is not under load settings as I cant put anything on my computer yet until the network thing gets fixed.

I hve the updated bios on the MOBO, my wife's computer is running fine on the internet that we have so it appears to be my new compy. It is really idaaspointing that its going to crap because I spent over 1.3k on this system and I cant even brows the net at a decent speed. I also have the correct drivers for my NIC card so I realyl dont know what could be happening with my system. Other then that, my rig is working perfectly.
1 - 2 of 2 Posts

· Registered
Joined
·
424 Posts
IMO ditch the network card.the mobo has it anyway.onboard is good enough....also....you used realtemp for temperature?i think it's impossible for you to hit 80c with stock settings.do you have an aftermarket heatsink/cooler or do you use stock?you might want to reseat it, or use a better thermal compound if you're that worried.
 

· Registered
Joined
·
424 Posts
that's good enough.maintain it below 70c for 24/7 usage
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top