Overclock.net banner

1 - 8 of 8 Posts

·
Registered
Joined
·
89 Posts
Discussion Starter #1
Hey guys need some help ive got a sweet rig but i just cant get pas 4.3ghz im running a 1-1 divider (ocz platnium) with a p4 extreme edition (stock at 3.73) ABIT Fatal1ty AA8XE board its got the 925xe chipset what can i do to go FASTER im going crazy here
 

·
Registered
Joined
·
89 Posts
Discussion Starter #3
well what should i run it at i havent had much luck with messing with memory timings not sure where to go form here your help would be appreciated a ton
 

·
Banned
Joined
·
1,451 Posts
well its a long process.
you just have to identify what components run at what speeds seperately.
First your cpu then your ram.
ANd then that sit.
 

·
Registered
Joined
·
89 Posts
Discussion Starter #5
????? I know what my mem runs at 290mhz and my cpu is at 4.3 roughly but any thing higher it crashes ive tried all of the basics (v-core, voltage to memory,0 I have great cooling in my case ???
 

·
Registered
Joined
·
49 Posts
i wouldnt feel the need to overclock that, if your doing it for games, there is no games out at the moment that need anything more than your system to run on full everything anyway

lol

i would be happy as hell to have what you have
 

·
Power Squid
Joined
·
9,609 Posts
Try a 5:4 divider and loosen the timings a little on the RAM.

Yes I know, easier said than done.
 

·
Registered
Joined
·
859 Posts
help getting to 999Ghz....i think your computer is fast enough...running a 1:1 at 4.3 is really good....what else could you want...
 
1 - 8 of 8 Posts
Top