[Electrochef]

My motherboard is the Crosshair III Formula, and my CPU is the Phenom II 965.

Quite simply I was able to change my CPU speed from 3.4 to 3.8, and my RAM from 1333 to 1600.

Here is what I did:

Are those changes good, or should I have changed something else, or to a different number?

My CPU: http://www.newegg.com/Product/Produc...-727-_-Product
My Motherboard: http://www.newegg.com/Product/Produc...0iii%20formula
My RAM: http://www.newegg.com/Product/Produc...-277-_-Product

 

[fordy314]

Just dont make the ram run past its advertised speed to be safe. If you did lower the fsb and up the cpu multiplier. Other than that. Just run prime 95 for like 5 hours or even a little longer to make sure its stable.

 

[IOSEFINI]

Set:
CPU/NB frequency - 2600MHz
HT link speed - 2000MHz
CPU/NB voltage - 1.375V
Check for stability and watch CPU temps. Change the CPU cooler if you want to go higher. Good Luck !!