[Nevakonaza]

Hi people!!!!!

right i need some serius help with Overclocking my system.

ive had it before clocked at 2.73Ghz and the memory which was 667Mhz at 772Mhz,it was Prime95 stable with the settings i had it at then,however.......

Now ive just purchased some new ram (OCZ 4GB (2x2GB) PC2-6400C5 Dual Channel Vista Gold Series DDR2)and defaulted all my clocks back to start fresh however i can still not go over 2.8Ghz it just fails within 1 minuite.

these are my settings in the bios

Quote:

Adjusted CPU FSB Frequency [400] Adjusted Cpu Ratio [7] Adjusted Cpu Frequency [2800] Mhz .................................................. .................................... FSB/Memory Ratio [1:1.00] Adjusted DDR Mem Frequency [800] .................................................. ..................................... Cpu Voltage [1.3750v] Memory Voltage [2.00v] Northbridge Voltage [1.375v] Southbridge [Auto]

what am i doing wrong? i sometimes got bluescreens when booting up aswell

dunno if it has to do with memory timings or soething? surely i can hit 3Ghz?

these screenshots are default system speeds.

teh ram i purcahsed

http://www.overclockers.co.uk/showpr...odid=MY-086-OC

 

[okorn]

First off all adjust your mem timings to 5-5-5-15, you will be gaining performance.

" i sometimes got bluescreens when booting up"
These bluescreen errors are usually caused by the ram, it might be unstable.
Please set your Memory Voltage to 2.1V (if u still get errors 2.2). Then 3Ghz should be recheable!