Overclock.net banner

help me with front audio panel

1420 Views 11 Replies 3 Participants Last post by  gerikoh
the case has these:
R-out
R-ret
L-out
L-ret
gnd
mic-pwr
mic-in

and the pins in the mobo are
1- port 1L
2- aud_gnd
3- port-1R
4- presence #
5- port 2R
6- sense1-return
7- sense-send
8- key
9- port 2L
10- sense2-return

i know r-out is 5, then r-ret is 6, l-out is 9 and l-ret is 10, and aud_gnd is 2.

but what about mic pwr and mic-in?

+rep to those who can help

thanks
1 - 4 of 4 Posts

· Registered
Joined
·
422 Posts
Quote:

Originally Posted by gerikoh View Post
yep.
where there?
YEAH RIGHT THERE?!?!!?!?!11ELEVEN!!Exclamationpoint11!1!!1!
lol

Quote:

Originally Posted by gerikoh View Post
in that article, it was stated that they were having a hard time with the drivers. but i haven't found anything that states no front mic pin. or maybe i'm just blind?

Under specs and Internal I/O connectors and headers. I don't see anything that indicates there is an internal connector for a mic. Most pc's only come with one Mic capability if i remember right. Yours seems to be located in the rear I/O panel.
 

· Registered
Joined
·
422 Posts
Quote:


Originally Posted by gerikoh
View Post

well, i guess i'm not seeing any mic header, but i'm sure it should be there.

even the most expensive ecs mobo doesn't indicate that there is a mic header
http://www.legitreviews.com/article/846/1/

and same goes with asus too
http://www.legitreviews.com/article/795/1/

and this is the mobo that i built for my friend
http://www.legitreviews.com/article/837/1/

all of them doesn't indicate, but i'm sure there is.

it's even in bundled software.

I don't know man. Usually though it would be indicated in the manual or user product specs and i just don't see it. I did try to help though =)
 

· Registered
Joined
·
422 Posts
Quote:


Originally Posted by gerikoh
View Post

haha so you want that +rep then?


thanks for the effort


Sorry I couldn't help though =/ Doesn't indicate on the manual anywhere?
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top