Overclock.net banner

help me with front audio panel

1419 Views 11 Replies 3 Participants Last post by  gerikoh
the case has these:
R-out
R-ret
L-out
L-ret
gnd
mic-pwr
mic-in

and the pins in the mobo are
1- port 1L
2- aud_gnd
3- port-1R
4- presence #
5- port 2R
6- sense1-return
7- sense-send
8- key
9- port 2L
10- sense2-return

i know r-out is 5, then r-ret is 6, l-out is 9 and l-ret is 10, and aud_gnd is 2.

but what about mic pwr and mic-in?

+rep to those who can help

thanks
1 - 7 of 7 Posts

· Efficiencycionado
Joined
·
6,099 Posts
Discussion Starter · #3 ·
Quote:

Originally Posted by Verrater View Post
Looks like everything but the mic right?Am i correct?

According to this there's no pin for the mic:
http://www.legitreviews.com/article/691/1/

There is a mic in and out on the rear I/O though...
yep.
where there?

in that article, it was stated that they were having a hard time with the drivers. but i haven't found anything that states no front mic pin. or maybe i'm just blind?


hmm i've built a buddy with the ecs gf8200 w/c was similiar and it had the exact f-audio pins. but the problem with my case is that the pins were scattered and i have to plug them one by one, unlike his case w/c is not, and he just had to plug it right away.
 

· Efficiencycionado
Joined
·
6,099 Posts
Discussion Starter · #5 ·

· Efficiencycionado
Joined
·
6,099 Posts
Discussion Starter · #7 ·
haha so you want that +rep then?


thanks for the effort
 
  • Rep+
Reactions: Verrater

· Efficiencycionado
Joined
·
6,099 Posts
Discussion Starter · #9 ·
this is what the manual says:
1- port 1L
2- aud_gnd
3- port-1R
4- presence #
5- port 2R
6- sense1-return
7- sense-send
8- key
9- port 2L
10- sense2-return

there were no printings of those front panel features at all.
 

· Efficiencycionado
Joined
·
6,099 Posts
Discussion Starter · #10 ·
can a mod please transfer this to the amd mobo section? thanks
 

· Efficiencycionado
Joined
·
6,099 Posts
Discussion Starter · #12 ·
yes we have the same.

and yes i got the front audio output working, but i'm still trying to figure out the mic.
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top