Overclock.net banner

1 - 8 of 8 Posts

·
Registered
Joined
·
134 Posts
Discussion Starter · #1 ·
My friend wants to cool his 2500k plus 2x6950s on a water cooling loop.

He has the RS240 rasa kit + a 120mm black ice radiator.

Will he need another radiator?

as in 240mm+240mm+120 to cool the cards and CPU?
 

·
Registered
Joined
·
920 Posts
Hi
I had a XSPC kit with a 2500K and 2 GTX 460's and that about the limite of the pump tryed to add a RX240 and flow went down to nearly 0.
Plus i am running RX Rad's

What case are you using and could he fit a 480/ / 360 RX RAD ?

smile.gif
 

·
Registered
Joined
·
1,044 Posts
If you had the two 240's and he didn't overclock then he should be fine but ideally he would have a 360 and a 240 in the loop for an OC and the two gpu's. He needs a 240 at least for the cpu OC and a 360 for the two gpu's.
 

·
Registered
Joined
·
134 Posts
Discussion Starter · #6 ·
Dang. didnt realize how much he needed to cool his system.

well. He can get a total of 240 + 120 + 240 but the only issue is. Will the RASA H2O 750 pump/reservoir handle that much ? People said they were weak.
 

·
Not New to Overclock.net
Joined
·
2,553 Posts
Quote:
Originally Posted by Vodkacooling View Post

Dang. didnt realize how much he needed to cool his system.
well. He can get a total of 240 + 120 + 240 but the only issue is. Will the RASA H2O 750 pump/reservoir handle that much ? People said they were weak.
My XSPC 450 lph pump handles EX240, Black Ice 120, Black Ice 92, EK Supreme CPU block, and an EK 5970 block without issue
thumb.gif
 

·
Registered
Joined
·
964 Posts
Quote:
Originally Posted by Vodkacooling View Post

Dang. didnt realize how much he needed to cool his system.
well. He can get a total of 240 + 120 + 240 but the only issue is. Will the RASA H2O 750 pump/reservoir handle that much ? People said they were weak.
The pump will be fine, I'm running an RX360 rad on a XSPC Raystorm and two Heatkiller Full Cover GPU Blocks and the flow I think is fine. I have nothing in the loop to show me anything regarding flow, however the water line in the Res is quite turbulent so im guess flow is good. I also have good temps which i guess could indicate im not getting poor flow.

As for the rads he needs, I would go with EX240 not RS240 and get a EX120. Thats if he can't fit a say a RX360 in anywhere, unless he doesn't care whether things are internal or external. You don't need boat loads of rads.
 
1 - 8 of 8 Posts
Top