[Kahuna513]

OK, I wasn't sure where to post this, but here goes...
My rig has been running fine up until now, well, up until about 10 mins ago actually...
I minimised an idle BF2 window on the menu, to talk to someone on IM, which usully works fine... However, upon maximising BF2, the PC display decided to freeze, with a black screen, but BF2 cursor, which I could still move.
So I hit reset
Now, the PC runs through the BIOS, and Windows XP boot screen, but as soon as it would usually say "Welcome", the monitor declares "No Signal Input".
The CPU was running slightly OC'd, but stable, and cooled sufficiently.
When I run windows, I get all the normal sounds, like the welcome sound.
I've tried unplugging everything (within reason), and when I reinsert the DVI cable into the GTX, Windows still plays the "Detected New Hardware" sound.
What's gone wrong?!
Thanks guys

 

[13 3 @ 7 l 3 13 0 y]

perhaps u fried ur gfx card.
take it out, and try the normal monitor output

 

[Evolutionsentra]

Try holding CTRL when booting up windows. When using coolbits that'll bypass any o/c settings on your GPU. If you dont use coolbits maybe it'll work with other OC software.

 

[Kahuna513]

Ok, thanks, but I don't have on board graphics.
I'll try the Ctrl thing now, as I do use coolbits
Thanks guys, keep you posted

 

[Kahuna513]

Nothing.
Tried the monitor on my mates PC here, and it's fine.