Overclock.net banner
1 - 10 of 10 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
Hi folks

your assistance is needed please.

I am new to the overclocking scene and am not sure where to go. I've manged to overclock my cpu to 2.8Ghz by increasing the fsb from 266 to 312. If i go above 312 my pc freezes and restarts.

My processor is the 2.4Ghz Q6600 Kentsfield G0
My Mobo is the Asrock 4Core 1333 Glan R2.0
My Heatsink is the Corsair H50

I would like to get above the 3Ghz mark. From what I've read on the internet this should be possible.

Cheers guys
 

·
Registered
Joined
·
974 Posts
Quote:

Originally Posted by iainr View Post
Hi folks

your assistance is needed please.

I am new to the overclocking scene and am not sure where to go. I've manged to overclock my cpu to 2.8Ghz by increasing the fsb from 266 to 312. If i go above 312 my pc freezes and restarts.

My processor is the 2.4Ghz Q6600 Kentsfield G0
My Mobo is the Asrock 4Core 1333 Glan R2.0
My Heatsink is the Corsair H50

I would like to get above the 3Ghz mark. From what I've read on the internet this should be possible.

Cheers guys

you need to up the multiplier, it clocks the cpu only
 

·
Registered
Joined
·
3 Posts
Discussion Starter · #4 ·
I've went into the bios to see if i could change the multiplier. the option is greyed out so i can't access it. is their anyway i can override it or get around it?
 

·
Registered
Joined
·
233 Posts
Quote:


Originally Posted by bringonblink
View Post

you need to up the multiplier, it clocks the cpu only


He can't increase the multiplier.

q6600's multipliers are locked.

Only intel's "extreme edition" parts have unlocked multipliers.
 
  • Rep+
Reactions: randyrhoadsrox67

·
Registered
Joined
·
233 Posts
didn't look at your mobo.

afaik, asrocks don't overclock well. at all.

Idk, in my opinion you should be fine at 2.8 and if you want to go faster, get a better board
 
  • Rep+
Reactions: randyrhoadsrox67
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top