I think it would be safe to say that your motherboard and or your CPU has simply hit its limit. Asrock isn't exactly an overclocking board and E7400 getting 4.3ghz isnt an easy feat.
1 - 20 of 27 Posts
Quote:
true but i had that bored, i couldnt get any fsb over 400mhz stable, i could post at 500mhz, and anything between but was impossible to get stable anything between 400-500
Originally Posted by minu94 For this Asrock i saw some very high FSB's. Over 500 Mhz so i think it can do it |
I don't want it very stable..i just want it for a Superpi run
![]()
Quote:
Ya it is, it's not a voltage to crank up though. try 1.26 first
BTW, don't run 1.5 vcore for very long. Just a minute or two
Originally Posted by minu94 If VTT is fsb term then the max was 1.36 |
BTW, don't run 1.5 vcore for very long. Just a minute or two
Maybe i can get in Safe -mode and run Super PI?? I'll go try it
![]()
3
Quote:
Quote:
thats because your not stable enough to load windows, its not a driver or software error, its stability
Originally Posted by minu94 Maybe i can get in Safe -mode and run Super PI?? I'll go try it
|
Quote:
Originally Posted by minu94 Didn't worked. Tried even with 10x multiplier... |
1 - 20 of 27 Posts
