Overclock.net banner
1 - 4 of 4 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
My processor currently runs stably at 2271 MHz
but that is with only multipliers set to their max, wenever i try to set the fsb higher it crashes
whatever the multiplier is and my motherboard only changes from 133MHz to 166MHz and 200MHz, isn't there any way that i can do it in 1MHz increments
 

·
Registered
Joined
·
175 Posts
Quote:


Originally Posted by Herr_SturmGeist

My processor currently runs stably at 2271 MHz
but that is with only multipliers set to their max, wenever i try to set the fsb higher it crashes
whatever the multiplier is and my motherboard only changes from 133MHz to 166MHz and 200MHz, isn't there any way that i can do it in 1MHz increments

I think it has a setting in the bios that says "user defined" os something similar. Set it to that and you can go 1 mhz at a time. Also lower you multi to about 10 and work with the fsb from there.
 

·
Premium Member
Joined
·
45,674 Posts
Set your "System Performance" to "Agressive"

Set your "CPU interface" to "Agressive"
You should be able to select as you wish!!!
But remember you MUST have a good FHS (Fan Heat Sink) to absorb the extra voltage you will need to OC that baby safely
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top