Overclock.net banner

1 - 3 of 3 Posts

·
Registered
Joined
·
53 Posts
Discussion Starter #1
Ok so I have a 800d and a Venomous X cooler. I was wondering what the best setup for this could be? In total I would purchase at max 5 fans including the ones for the cooler. So far I bought two Scythe Slipstream 1600rpms. But I’ve been looking at the CoolerMaster R4’s Rifle bearings. They seem very quiet for 90-100CFM. Advice would be much appreciated.
 

·
Registered
Joined
·
2,935 Posts
slipstreams are decent case fans, but not for heatsinks
get a 38mm fan for the venomousX and that should take care of it
then use the other 4 fans for the 800d
 

·
Registered
Joined
·
575 Posts
R4s are good case fans, as are Slipstreams, but you'll need some static pressure for heatsinks and rads. 38mm's like getbigtony suggested or some Yate Loons are usually a safe bet. If you want one of the best noise/cfm ratios, Gentle Typhoons are highly recommended by a lot of folks around here.
 
1 - 3 of 3 Posts
Top