Overclock.net banner

1 - 11 of 11 Posts

·
Registered
Joined
·
27 Posts
Discussion Starter · #1 ·
Ok I really need help with overclocking all together, ram, cpu, etc. I already set my cpu from 2.66 to 3.04 but i cant set my voltage higher because my pc beeps. Can someone please look at my cpu-z info and see what i can change to make my pc run faster and more stable. Thank you

CPUID Output
------------------------------------------------------------------------------
Number of CPUs 1
APIC ID 0
Name Intel Pentium 4
Code name Northwood
Specification Intel(R) Pentium(R) 4 CPU 2.66GHz
Family/Model/Stepping F27
Extended Family/Model 0/0
Brand ID 9
Package mPGA-478
Core Stepping C1
Technology 0.13µ
Instructions Sets MMX, SSE, SSE2
Clock Speed 3039.8 MHz
Clock multiplier x20.0
Front Side Bus Frequency 152.0 MHz
Bus Speed 608.0 MHz
L1 Data Cache 8 KBytes, 4-way set associative, 64 Bytes line size
L1 Trace Cache 12 Kµops, 8-way set associative
L2 Cache 512 KBytes, 8-way set associative, 64 Bytes line size
L2 Speed 3039.8 MHz (Full)
L2 Location On Chip
L2 Data Prefetch Logic yes
L2 Bus Width 256 bits

Chipset
------------------------------------------------------------------------------

Northbridge SiS SiS648 rev. 3
Southbridge SiS 963 rev. 25
Graphic Interface AGP
AGP Revision 3.0
AGP Transfert Rate 4x
AGP SBA supported, enabled
AGP Aperture 128 MBytes
Memory Type DDR
Memory Size 1024 MBytes
CAS# 3.0
RAS# to CAS# 4
RAS# Precharge 4
Cycle Time (tRAS) 6
Bank Cycle Time (tRC) 11

Memory SPD
------------------------------------------------------------------------------

DIMM #2

General
Memory type DDR-SDRAM
Manufacturer (ID) Samsung (CE00000000000000)
Size 864 MBytes
Max bandwidth PC2100 (133 MHz)
Part number M3 68L6423BT1-CB0
Manufacturing date Week 00/Year 00

Attributes
Number of banks 2
Data width 64 bits
Correction None
Registered no
Buffered no

Timings table
Frequency (MHz) 100 133
CAS# 2.0 2.5
RAS# to CAS# delay 4 5
RAS# Precharge 2 3
TRAS# 20 26

DIMM #3

General
Memory type DDR-SDRAM
Manufacturer (ID) (FFFFFFFFFFFFFFFF)
Size 512 MBytes
Max bandwidth PC3200 (200 MHz)
Part number
Serial number FFFFFFFF
Manufacturing date Week 255/Year 255

Attributes
Number of banks 2
Data width 64 bits
Correction None
Registered no
Buffered no

Timings table
Frequency (MHz) 0 166 200
CAS# 2.0 2.5 3.0
RAS# to CAS# delay 0 4 4
RAS# Precharge 0 4 4
TRAS# 0 8 9

DMI BIOS
--------
BIOS #1
vendor Award Software, Inc.
version ASUS P4S8X-X ACPI BIOS Revision 1005 Beta 001
date 10/31/2003

DMI System Information
----------------------
System #1
manufacturer System Manufacturer
product System Name
version System Version
serial SYS-1234567890
UUID 00000000-00000000-00000000-00000000

DMI Baseboard
-------------
Baseboard #1
vendor ASUSTeK Computer INC.
model P4S8X-X
revision REV 1.xx
serial xxxxxxxxxxx

DMI Processor
-------------
CPU #1
manufacturer GenuineIntel
model Intel(R) Pentium(R) 4
clock speed 3039.0MHz
FSB speed 152.0MHz
multiplier 20.0x

DMI Memory Controller
---------------------
Memory Controller #1
correction unknown
Max module size 1024MBytes

DMI Memory Module
-----------------
Memory Module #1
designation DIMM 1
Memory Module #2
designation DIMM 2
size 512MBytes (double bank)
Memory Module #3
designation DIMM 3
size 512MBytes (double bank)

DMI Physical Memory Array
-------------------------
Physical Memory Array #1
location Motherboard
usage System Memory
correction None
max capacity 1024MBytes
max# of devices 3

DMI Memory Device
-----------------
Memory Device #1
designation DIMM 1
format DIMM
type DRAM
Memory Device #2
designation DIMM 2
format DIMM
type DRAM
total width 64bits
data width 64bits
size 512MBytes
Memory Device #3
designation DIMM 3
format DIMM
type DRAM
total width 64bits
data width 64bits
size 512MBytes

Software
------------------------------------------------------------------------------

Windows Version Microsoft Windows XP Professional Service Pack 2 (Build 2600)
DirectX Version 9.0c
 

·
Registered
Joined
·
27 Posts
Discussion Starter · #4 ·
Yes it is stable. There has only been one or two times it reset and that is because my room was really hot and i was playing a game. I want to set it higher but people are telling me it is my ram that is screwing it up. So i decided to post my settings and see if someone can look at it and see if there is anything i did wrong.
 

·
Banned
Joined
·
1,013 Posts
ok so if it is stable at 3.04 continue to raise the fsb until it is not stable. then try and raise your vcore. i cant understand why your computer would beep when you raise the vcore. when exactly does it beep and how many times??
 

·
Registered
Joined
·
27 Posts
Discussion Starter · #6 ·
It beeps constantly untill i change back the settings.
 

·
Registered
Joined
·
965 Posts
Quote:

Originally Posted by MaD_cOw
I its the PC speaker unplug it! it happened 2 me even if I over Clocked it form 300 to 337
That beep is telling you of a problem.... A fix of the sound would be disconecting the speaker, but that dosent' fix the root problem.. That just makes it so you cna't hear it erroring!

Heres a idea! My cpu temps are at 80c, but I knwo a fix! i'l just turn off my thermometer, no more 80c temps to look at!
 

·
Registered
Joined
·
27 Posts
Discussion Starter · #9 ·
OK im not asking about the stupid sound. I am just asking how i can change my settings withought it beeping. Thanks.
 

·
Banned
Joined
·
1,013 Posts
the beeping is telling you there is a problem. in your mobo manual there may be something helping you to decode this beep. have a look through.
 

·
Banned
Joined
·
1,057 Posts
its an asus. you hit the limit of the chip. anything over 230/?? will beep constantly on my P4S800-MX until i reset the bios
 
1 - 11 of 11 Posts
Top