Help with Q6600 OC with new RAM...

199 Views 2 Replies 2 Participants Last post by Anth0789, Mar 10, 2009

Anth0789

Discussion Starter · Mar 10, 2009

Now with the the new ram I can't seem to get a good OC out of my Q6600. It looks like my ram is running at 800mhz instead of 1066mhz @ 5-5-5-15 timings. What do you guys think I should do to get a decent OC out my new ram? I think im able to get it at 3.4Ghz stable but the ram is running around 950mhz.

Save

1 - 3 of 3 Posts

Acoma_Andy

· #2 · Mar 10, 2009

You could lower the multi and raise the FSB. That's the easiest method. Or use the 378FSB (if that's where you are at) and try the memory multi x3.

378 x 3 = 1134mhz though, so I'm not sure if your set can handle that. If you don't have the PI 8500's, 1134mhz might be possible.

Save

Reactions: 1

Anth0789

Discussion Starter · #3 · Mar 10, 2009

Got it 3.4Ghz stable now...

Save

1 - 3 of 3 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month