Overclock.net banner

1 - 4 of 4 Posts

·
Registered
Joined
·
30 Posts
Discussion Starter #1
How do you mount the pump top directly under the reservoir without using tubing to connect them? Do you need a special fitting, does the reservoir come with a fitting to attach it? I want the reservoir to rest on top of the pump, which will be sitting on the group, maybe with some velcro. Sort of like how he did it in this picture:



These are the same items he used as well as what I will be using, the difference is, I want to use the top port where he has an led for intake.:

Reservoir: Bitspower Water Tank Z-Multi 150 (http://www.frozencpu.com/products/16935/ex-res-418/Bits...)
Pump: Swiftech MCP355 (http://www.frozencpu.com/products/5125/ex-pmp-47/Swifte...)
Pump Top: XSPC Laing DDC MP355 Acrylic (http://www.frozencpu.com/products/5733/ex-pmp-52/XSPC_L...)

Thank you in advance!
 

·
Registered
Joined
·
30 Posts
Discussion Starter #3
Thank's a bunch. The pump shouldn't have any kind of a hard time supporting the res right, since I'm going to use Velcro on the bottom of the pump?
 

·
Registered
Joined
·
1,487 Posts
Quote:
Originally Posted by GMPoison View Post

Thank's a bunch. The pump shouldn't have any kind of a hard time supporting the res right, since I'm going to use Velcro on the bottom of the pump?
You can get very strong velcro but I would probably bolt it down.
 
1 - 4 of 4 Posts
Top