Overclock.net banner

Help

1001 Views 13 Replies 7 Participants Last post by  Inquisitor
i was soft modding my 9600 to a xt and when i loaded it up the vision started spazzing\\\\

i cant see anything

please tell me how to get my old settings back.... i have a paper due in 2 days
1 - 14 of 14 Posts
Can't you flash it back? And the reason its spazing is because its overclocked wayyyyyyyyyyyy to far. Artifacts on a higher level. lol
yeah you should be able to just flash it back.
Use an old PCI card to flash back if it gets too bad...
i really cant see anything......

i did back up my bios though by typing flashrom -s 0 orginal.bin

do i just type flashrom -p 0 original.bin

if so what do i do after that to get back to boot up
take your agp card out put your pci card in go to bios change your boot up init to the pci card then flash back
what pci card... do i need to buy one that hooks in a moniter to make this work??

i really need help bad i really just want to get it all back to normal is ther anyway to completely reset everything

and plz dont say cmos jumper..... cus i already tried that
Quote:


Originally Posted by The Dark Inquisitor

i was soft modding my 9600 to a xt and when i loaded it up the vision started spazzing\\\\

i cant see anything

please tell me how to get my old settings back.... i have a paper due in 2 days

just ues a pci card to reflash the beckup bios back. that's all you should do.
See less See more
Don't you have a PCI model video card? you know? As in not AGP? lol
heres a link to multiple ones...im thinking 1 of those for 20$...:
http://www.newegg.com/app/ViewProduc...=1&Order=price
Just buy a cheap PINE pci card, $15 for a 32mb card, its good enough for when your to scared to risk the death of a good card
See less See more
well i am thinking about just gettina a new mobo because i have been planning that for a while .... would that make it work?

thanks
1 - 14 of 14 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top