[Jeckyl]

So I wanna get my new rig working right before I try to overclock it. The problem I am having is this:

On the top of my case I have 2 usb ports, which I plugged in correctly, and a usb20 card. However the only usb ports that are working correctly are the ones onboard the motherboard...

Any ideas why this is happening, or how I can fix it? I am pretty sure this is not a driver issue since everything seems to be checking out fine in device manager.

 

[YiffyGriffy]

You might have to enable the USB ports in BIOS

 

[Sloth_Boy]

yes that, and double check you have the case USB's plugged into the motherboard properly (check, right plug, right pins if yours uses pins and other stuff)

 

[Jeckyl]

Quote:

Originally Posted by YiffyGriffy You might have to enable the USB ports in BIOS

where in the bios is that... I can't find it...

 

[Lostnhell]

Quote:

Originally Posted by Jeckyl where in the bios is that... I can't find it...

Check my same response on http://www.overclock.net/showthread....ed=1#post68172