[kitt3]

Alright .....

Timings set at auto .
Multi x11
fsp 255
Vcore AUTO

Vdimm auto.
HTT X4

I just got it to 2.81 ghz it seemms stable i didnt run any prime testing yet iam going to bench first. However, temp is set at idle 32 load 39 with TTBT.

Whats next MY GOAL IS 3.0ghz . SO WHATS NEXT STEP GUYS?

Take that San diego

.

 

[ThaWaxShop]

Quote:

Originally Posted by kitt3 Alright ..... Timings set at auto . Multi x11 fsp 255 Vcore AUTO Vdimm auto. HTT X4 I just got it to 2.81 ghz it seemms stable i didnt run any prime testing yet iam going to bench first. However, temp is set at idle 32 load 39 with TTBT. Whats next MY GOAL IS 3.0ghz . SO WHATS NEXT STEP GUYS? Take that San diego .

haha i run my san diego at 273 with 1.55vcore 3x htt and vdimm at 2.7 n stock cooling i idle at 38c at load its like 53c. Cant wait for the water to be finished. Keep pushing it man

 

[kitt3]

we just started lol vcore is auto. running at 255 wonder wat would 155v get me

Edite , load temps r 40c not 39

.

Anyways, i dont really understand the HHT of 4x or 3x i dont noe their roll in overclocking!!. So any1 wats next step!

 

[ThaWaxShop]

Quote:

Originally Posted by kitt3 we just started lol vcore is auto. running at 255 wonder wat would 155v get me Edite , load temps r 40c not 39 . Anyways, i dont really understand the HHT of 4x or 3x i dont noe their roll in overclocking!!. So any1 wats next step!

just keep it under 1000 (fsb x whatever htt set to) so 255 x 4 is still ok but ne higher set it to 3x

 

[kitt3]

**** , currently running 265fs with htt x4 :S , windows loaded and iam running prime its been 15 min stable so far :S .Aww iam over 1000 by 10060:O, brb gotta change it :O.

 

[ThaWaxShop]

well drop the htt its apparently no good and youll get no benefit

 

[kitt3]

Quote:

Originally Posted by ThaWaxShop well drop the htt its apparently no good and youll get no benefit

if i drop the htt do i have to do something with timings ?

 

[kitt3]

soon iam going to post pix stay tuned

.Now iam running

auto timings
vdimme auot
vcore auto
multi x11
fsp 265

ill take some pix rite now iam going to run prime test and ill go eat in bk then ill come and post the results pix.

 

[ThaWaxShop]

Quote:

Originally Posted by kitt3 if i drop the htt do i have to do something with timings ?

no just drop the htt to 3 and youll be ok up to 333.3~ mhz

 

[kitt3]

humm i dunno i went to bk and it seems my bro dont know about primetest it slows pc so he said mouse dont move when i was callin em from burgerking so now i have to start another settings and test pssh.

 

[kitt3]

Well now i want to start a new step well first i dont wana touch the timings so far so is this good start

Vdimm auto
Multi x11
fsp 265
vcore 1.48v
htt x3.

so far so good ?

 

[kitt3]

first this is pic of the cpu-z

benched 2001 and then i played for like 15 min and temp seems fine idle 33 load 41.

i can feel it iam close from 3.0ghz , any help

.

FSB 265
multi x11
Vdimm auto ( btw dose increasing Vdimm improve performance overall or wat it dose ? What is the roll for Vdimm ?)
HTT x3
divider 333mhz.

 

[kitt3]

lol so far so good knoc on wood whoever sees this lol , just kiding .

 

[kitt3]

should i say stable i was listenning to music and surfing the net for 3 houres

.

 

[tytlyf]

your voltage on your cpu looks good, but you can speed your memory up ALOT. I wouldn't recommend using any "auto" settings. Set your vcore to 1.5-1.525, your Vdimm (mem voltage) to 2.7, and your memory divider to 200 (DDR400). You want your memory running at the same speed as your FSB. So if your cpu is at 265 x 11, that would make your memory run at 265....dont use a memory divider with that memory, and use the 2.5-3-3-6 timings (1T)

 

[Mr. Mumbles]

Dear God, I wish i got that stepping on my opty when I had one, I had to get stupid CABGE