How do I Make A Divider?????????????

305 Views 3 Replies 3 Participants Last post by kingy, Dec 8, 2006

kingy

Discussion Starter · Dec 8, 2006

how do i create a divider between my ram and my cpu? i am i a funny position because my mobo is 1066 fsb ddr2 but my cpu pentium d 950 is only 800fsb so what should i run my mobo at 1066 or 800 fsb? and why can i not get 1 : 1 ratio on this stupid abit aw8-max mobo and this pentium d 950? ps my ram is ddr2 pc 5200 667mhz.

Save

1 - 4 of 4 Posts

mudd

· #2 · Dec 8, 2006

i don't believe you want to use dividers on intel boards. just loosen your ram timings and try to stay at 1:1 ratio

Save

gonX

· #3 · Dec 8, 2006

Quote:

Originally Posted by mudd

i don't believe you want to use dividers on intel boards. just loosen your ram timings and try to stay at 1:1 ratio

That is very true, seeing that you have DDR2-1066 RAM (533 MHz real speed) to a 200MHz CPU, you'll run 200MHz on stock.

What you now want to do, is to run a low multiplier on your CPU with a 1:1 divider, and when your CPU craps out, adjust the divider so you get the highest achievable speeds.

See less See more

Save

kingy

Discussion Starter · #4 · Dec 8, 2006

I cant get 1 - 1 the best i can get is 3 - 4 at 4-4-4-9 how do i get 1 - 1? and this is with my fsb at 256 i do not want to go higher i am already at 4.3 ghz i just need to know how to divide or get 1 - 1 if anyone can show me i will be very grateful.

Save

1 - 4 of 4 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month