a dremel and a fiberglass reinforced disk for metal will work perfectly
this is how I did it for The Intelligence case
this is how I did it for The Intelligence case
How to cut the tj07 for a slot loading cd/dvd
2
How to cut the tj07 for a slot loading cd/dvd?
do i use dremel? if so, do i use the fiberglass attachment?
that part of the tj07 seems to be a little thicker than usual...
i want a clean cut for a cd/dvd slot loading drive
thanks in advance.
![]()
![]()
do i use dremel? if so, do i use the fiberglass attachment?
that part of the tj07 seems to be a little thicker than usual...
i want a clean cut for a cd/dvd slot loading drive
thanks in advance.
1 - 6 of 6 Posts
You'll have silver edges where you make the cut.
![]()
Seems overkill but I used an angle grinder to do it then just feathered the edges with some needle files as required.
Get some little black model paints to touch up the silver edge, or a sharpie, or have it re-coated.
Seems overkill but I used an angle grinder to do it then just feathered the edges with some needle files as required.
Get some little black model paints to touch up the silver edge, or a sharpie, or have it re-coated.
3
Quote:
cool! but i definitely dont want to have it recoated
![]()
thanks guys!
Originally Posted by marcus000 You'll have silver edges where you make the cut.
Seems overkill but I used an angle grinder to do it then just feathered the edges with some needle files as required. Get some little black model paints to touch up the silver edge, or a sharpie, or have it re-coated. |
thanks guys!
1 - 6 of 6 Posts
