[skwannabe]

I got the sticker off with a heat gun but what about the sticky stuff left over?

 

[The Master Chief]

walmart... goo gone

 

[burton560]

rubbing alcohol does it too

 

[Lucky 13 SpeedShop]

Zippo lighter fluid. Much cheaper, and works better than GooGone.

 

[Citra]

Quote:

Originally Posted by Lucky 13 SpeedShop;13104048
Zippo lighter fluid. Much cheaper, and works better than GooGone.

Seems dangerous though.

 

[Lucky 13 SpeedShop]

Quote:

Originally Posted by Citra;13104059
Seems dangerous though.

Well sure, if you set it on fire. Common sense would dictate that you don't attempt cleaning the adhesive off near a raging inferno.

 

[hirolla888]

90% isopropyl alcohol should do it

 

[skwannabe]

Quote:

Originally Posted by hirolla888;13104193
90% isopropyl alcohol should do it

I tried that but it wasn't really doing anything. I guess I'll try again.

Thanks everyone

 

[hirolla888]

Quote:

Originally Posted by skwannabe;13104302
I tried that but it wasn't really doing anything. I guess I'll try again.

Thanks everyone

your other option i'd say would be to get adhesive remover from the hardware shop. get the stuff that's safe to use on painted surfaces so you don't damage the PSU surface

 

[Homeles]

Quote:

Originally Posted by Lucky 13 SpeedShop;13104169
Well sure, if you set it on fire. Common sense would dictate that you don't attempt cleaning the adhesive off near a raging inferno.

I'm sorry, but, this is totally something I would do.