Overclock.net banner

I am determined to hit 3 Ghz!

650 Views 19 Replies 9 Participants Last post by  tytlyf
Well, I found out last weekend what my highest possible overclock is on my 3700, 2.95 with 1.65 vcore. Specs to follow:
2-2-2-5 Timings, I can do CAS 1.5, but apparently there's a performance hit associated with 1.5?
Vcore 1.65, Vdimm 3.5, Vchipset 1.6, LDT 1.2.

I'm able to do 3.0 ghz, 300*10, but it's not stable. I started to bump up the vcore, and in OCCT, I noticed that as vcore increased, the test failed closer to finishing, so I concluded that as I juiced it up more, stability did increase, but I was running 1.75 vcore before I backed off at 295*10 at 1.65 vcore, where I'm comfortable. Is there another route I should take besides trying to juice it up, or is this the limit of the chip?
1 - 4 of 4 Posts

· Registered
Joined
·
1,224 Posts
why you using the x9 multi? Keep it with 11 or 10, not worth the 9. It's too bad it wont go any higher, I bet it could if you had cooler temps on the chip you could have a little room to play.
 

· Registered
Joined
·
1,224 Posts
well, he's trying really hard to get 3.0 stable and I'm trying to give advice, theres not much I can do because I'm sure burn knows his stuff. Voltage is king unless that's the chips limit.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top