Overclock.net banner

I finally upgraded!!

319 Views 6 Replies 3 Participants Last post by  Iceman0803
Well I finally did it, I've upgraded from my trusty HD 3850 (thx |LAW|Doom) to a Sapphire HD 4870 Toxic Edition. I've run 3DMark06 and I scored 13883 (I think. I don't remember the exact number and when I went back to the address it didn't display my score). I was wondering if that sounds about right given my current setup. My clocks btw are 780/1000 (mildly oc'ed from the factory).
1 - 7 of 7 Posts
Very nice, pretty much same setup as you, i got 14k.
See less See more
  • Rep+
Reactions: 1
Quote:

Originally Posted by kairi_zeroblade View Post
your good as new man!!nice scores..

Thx!

Quote:

Originally Posted by Trav1s View Post
Very nice, pretty much same setup as you, i got 14k.

Nice. I'm pretty much right where I should be then.
Btw great OC on the cpu 3.4 @ 1.2v!! As you can see it takes me 1.36
See less See more
6
Quote:

Originally Posted by Iceman0803 View Post
Thx!

Nice. I'm pretty much right where I should be then.
Btw great OC on the cpu 3.4 @ 1.2v!! As you can see it takes me 1.36

try lowering the voltage a bit your using one of the best OC boards out there you should catch it on a lower voltage..try playing with the card as well..high mem clocks can result good FPS..but also be reminded that the core clock and mem clocks should be balanced as well..
See less See more
3
oohh btw with that clock i think this should be fitting it nicely..core clocks ranging 815-825 and with that memclock 1100..
See less See more
Quote:

Originally Posted by kairi_zeroblade View Post
try lowering the voltage a bit your using one of the best OC boards out there you should catch it on a lower voltage..try playing with the card as well..high mem clocks can result good FPS..but also be reminded that the core clock and mem clocks should be balanced as well..
Anything below 1.36 on my CPU is not stable unfortunately. I've tried
See less See more
2
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top