Overclock.net banner
1 - 3 of 3 Posts

·
Registered
Joined
·
847 Posts
Yes, they will work in RAID0.
RAID can sometimes go a bit funny with passing on TRIM, but I believe that new chipsets, such as your Z97, will do it. You may need to install Intels SSD toolbox.
There's something that gets installed with drivers that you will need. It is not the Intel SSD toolbox.
EDIT; It's Intel RST.

http://lifehacker.com/5640971/check-if-trim-is-enabled-for-your-solid-state-drive-in-windows-7
http://www.eightforums.com/tutorials/39569-trim-support-ssd-check-enable-disable.html

Enable TRIM

Code:

Code:
fsutil behavior set disabledeletenotify 0
 

·
Registered
Joined
·
847 Posts
Data loss, sorry for not being clear.
In RAID0, if one drive dies, you lose all the data on the RAID.
It does not increase the chance of individual drive failure, but because you would be working with 2 drives, there's a greater chance for one of them to fail.
I'm not too sure of the maths for figuring out the chance of drive failure across 2 drives, too long since high school, but it is a kinda substantial increase to chance.
You should have a backup regardless, but backups are even more important on RAID0 arrays.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top