Overclock.net banner
1 - 1 of 1 Posts

· Premium Member
Joined
·
5,292 Posts
Yes you should have speedstep off, but that isn't going to lower temps. You're going to need to lower your memory divider in order to o/c higher - 950's don't really like lots of memory or very high memory speeds as they have weak internal memory controllers.

With 1.4v you should easily be able to hit 4.2+ GHZ - my i7 930 used to do 4.2 @ 1.28v and most can do 4+ at 1.35, you might just have to play around with your other voltages - QPI can be a killer one to figure out.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top