Overclock.net banner
1 - 1 of 1 Posts

· Premium Member
6,800 Posts
My voltages for 185 x 23 - Ram @ 1485

My QPI is at 1.25v (NB Core)

IMO your QPI voltage is too high, also disable speedstep, C-State and EIST, enable LLC.

For up to 4.0 you should be fine right around 1.36v to go past 4.0 you should need 1.40 on average
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.