[Jasonn20]

It has max multi of 50x and needs 1.5v+ for 5ghz which is too much for my cooler.

How crappy is my 2600k..??

][/URL]

 

[age_ruler1]

Should go higher.. :/

 

[sp4wners]

4.8GHz + 1.032v and You say crappy? What should I say about my CPU then? I know they're different but dude... Why do You need 5GHz? I don't get it.

 

[hollywood406]

Yeah, you should sell that crappy chip to me!

I can understand wanting to get to 5ghz. I was the same with my i7 920, but 4ghz was the "holy grail" for us. I would be really happy if that was my chip.

 

[Jasonn20]

Quote:

Originally Posted by sp4wners 4.8GHz + 1.032v and You say crappy? What should I say about my CPU then? I know they're different but dude... Why do You need 5GHz? I don't get it.

It is 4.8ghz @ 1.428vcore as cpuz is not accurate.

 

[sp4wners]

4GHz is more than enough for me. I don't get why do You all need 5GHz? My e-pen is big enough with 4.2GHz for everyday use and 4.6GHz for benchmarks

Edit: Whatever, with 5GHz you don't even notice framerate jump. If it's crappy to You I can trade with You

4.8GHz it's an awesome result and You should be happy with it and stop complaining.

 

[Jasonn20]

Quote:

Originally Posted by sp4wners 4GHz is more than enough for me. I don't get why do You all need 5GHz? My e-pen is big enough with 4.2GHz for everyday use and 4.6GHz for benchmarks Edit: Whatever, with 5GHz you don't even notice framerate jump. If it's crappy to You I can trade with You 4.8GHz it's an awesome result and You should be happy with it and stop complaining.

Where did you get I was complaining and I need 5ghz..? I was wanting to know how this chip stacks up against a few others.

 

[sp4wners]

Quote:

Originally Posted by Jasonn20 How crappy is my 2600k..??

?? I think it's pretty good. 4.8GHz is more than You need. Why do you asking about 5Ghz? Do You need them for something? I didn't saw any application that needs 5GHz CPU

In my country you'll be one of the best with 2600K and that clock.

 

[Sushimaster]

@ sp4wners, we re in overclock.net!! OVERCLOCK!!!

 

[sp4wners]

Oh really? I didn't noticed that.... Thank god that You informed me

 

[deletethegame]

double.

 

[deletethegame]

sp4wners, imagine your chip only being capable of handling 3.8ghz when others can hit 4.2

 

[sp4wners]

It's different. My chip is D0 and it almost impossible to hit only 3.8GHz. But hitting 5GHz? For what? Bigger e-pen?

i'm overclocking CPUs from almost 14 years, and I still don't understand it. "Wow, everyone has 5GHz so my chip must hit 5GHzs too"

And if You'll say that 4.8GHz with 2600K is bad, then I'm gonna laughing for all night

 

[compudaze]

I would rate it 3/5. I've had two 2600k's that do 12h prime blend at 4.8ghz <= 1.375V and one of them has a 56x max multi (haven't checked the other yet, maybe it's a magical 57x one ;p). but maybe i'm just lucky though?

 

[Falkentyne]

Quote:

Originally Posted by Jasonn20;13083364
Where did you get I was complaining and I need 5ghz..? I was wanting to know how this chip stacks up against a few others.

Ok Jason,
Calm down, go into your BIOS, set it back to x34, boot back into BIOS,then tell me the default VID in white (shown next to the manual cpu voltage selection to the right of it).

I'm guessing you have a high VID chip (1.245v or higher) but i want to see...

Also when you set it to x50, 5 ghz, and PLL overvoltage enabled, and you select your 1.5v in the BIOS, is the VID showing as 1.390 or 1.395v ?

 

[hirolla888]

Quote:

Originally Posted by Jasonn20;13083177
It has max multi of 50x and needs 1.5v+ for 5ghz which is too much for my cooler.

How crappy is my 2600k..??

[URL=http://img847.imageshack.us/i/i7stability.png/]

it took me a while to get 5.1ghz @ 1.43v. i just tried different vrm settings and dropped the pll voltage (so chip runs cooler), eventually i got it stable at 1.43v (bios 1.43, actually is 1.44 under 100% load and 1.425 rest of the time due to the 'extreme' load line calibration setting).

So just play around with it for a while

 

[Lerkah]

get a better cooler and go higher?