Overclock.net banner
1 - 20 of 41 Posts

· Registered
Joined
·
16 Posts
Discussion Starter · #1 · (Edited)
Motherboard: Asus Prime z790-a wifi (not my first choice but it was available)
CPU: i7 13700k
Ram: Corsair Vengeance 2x32Gb 5200mhz 40CL
Storage: Samsung 980 Pro 1 Tb / 2tb D:
Graphics: Gigabyte 3070ti Aorus elite
windows11 pro 22h2

is this normal? I can't get the ram to run full speed with this motherboard without crashing BSOD Memory issues. 5000mhz is all I can set in Bios / stable.

Temps and HWiNFO64 data while running cinbench:

Font Screenshot Rectangle Technology Software

Font Rectangle Parallel Pattern Screenshot

Rectangle Font Parallel Pattern Screenshot

Rectangle Font Parallel Pattern Number
 

· Registered
Joined
·
903 Posts
BIOS version? I ran 7000MT/s on that same board.
If not the latest, update to 0802 and try again.

BTW what cooler do you have? 101C is a little alarming for a a 13700K..
 

· Registered
Joined
·
16 Posts
Discussion Starter · #3 ·
BIOS version? I ran 7000MT/s on that same board.
If not the latest, update to 0802 and try again.

BTW what cooler do you have? 101C is a little alarming for a a 13700K..
Bios says it's the latest with 0602
BIOS Version/Date American Megatrends Inc. 0602, 9/21/2022


Artic II 360 AIO running 1800 RPM


idle temperature is 38/39C
 

· Registered
Joined
·
498 Posts
Your CPU is throttling/overheating because your cooling needs to be remounted

Try 1.1 VCCSA or at least 1.0
0.816v seems off in the readings....







Try 1.26-1.35 CPU VDDQ

try 1.28 vdd, 1.28vddq
 

· Registered
Joined
·
903 Posts

· Registered
Joined
·
498 Posts

· Registered
Joined
·
1,330 Posts
Check what mem you got with cpu-z, i'm afraid is not even m-die.
 

· Registered
Joined
·
1,348 Posts
When you say you cannot get the RAM to post correctly, do you mean that you are not able to set an XMP profile for its rated speed? Have you tried setting the memory up manually?

What is the exact part/model number for the RAM kit?

Edit: the QVL for the motherboard lists Dominator memory kits at 5200 -- not sure if it matters or not, but you might not have supported/tested memory for this motherboard.
 

· Registered
Joined
·
1,330 Posts
SPD tab
 

· Registered
Joined
·
5,322 Posts
5200 kit is likely micron.
 
  • Rep+
Reactions: Telstar

· Registered
Joined
·
1,330 Posts
1 - 20 of 41 Posts
Top